BlackBird97 1 Posted August 25, 2012 Report Share Posted August 25, 2012 I was helping a buddy of mine out with his new S12 and one of the things we were doing is fitting the MD20 drum. It looks like on the newer S12's , they have a different magazine release and it's preventing the MD20 from fitting properly. Has this happened to anybody else? Do you know if there is a solution to this? Thanks much. Quote Link to post Share on other sites
Misery 22 Posted August 26, 2012 Report Share Posted August 26, 2012 I would say file the lips till it fits no s12 is exactly the same Quote Link to post Share on other sites
jdtravers 637 Posted August 26, 2012 Report Share Posted August 26, 2012 The magazine catch is of a new design, but it is dimensionally the same as previous models. Fit the drum as prescribed. Do not fuck with the magazine release or you will have problems with stick mags being loose. Let me back track a little here. Does the factory, SGM, or any other stick magazine fit the shotgun properly? If they fit with no problem then keep removing the contact points on the drum. If stick mags do not lock in, then you may need to remove a few thousand from the magazine release. Removing materiel from the magazine release should be the LAST resort. But there are replacement magazine releases' available. I probably have a couple hundred of them in a parts bin if you need one. Jack 4 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.