mattv2099 44 Posted September 16, 2012 Author Report Share Posted September 16, 2012 Why not clearance the tube over the PG nut on your trigger guard? The tapco t6 stock tube I used in my saiga conversion is a different length than the tubes on all of my other guns :0 And I only have one bumpinator stock. This stock works on all my guns except the Saiga. I would have to modify the bumpinator extensively to make it work on the Saiga. Or make a second bumpinator specifically for the Saiga. I already have an extra tube of the perfect length I can slap on the Saiga. So the simplest, quickest and cheapest solution is to get a second trigger guard, modify it and slap it on the saiga. And since I need new magazines (my drums won't bump but those 10 round mags bump like bosses) I might as well just get a trigger guard in the same order Quote Link to post Share on other sites
mattv2099 44 Posted September 17, 2012 Author Report Share Posted September 17, 2012 http://youtu.be/U3rL8n3McU0 2 Quote Link to post Share on other sites
MT Predator 2,294 Posted September 18, 2012 Report Share Posted September 18, 2012 You need to devise a way to keep it together. I caught that. 1 Quote Link to post Share on other sites
mattv2099 44 Posted September 18, 2012 Author Report Share Posted September 18, 2012 You need to devise a way to keep it together. I caught that. That's part of the design actually! It will all make sense when we deconstruct it I'll give everyone the blue prints for the simplest solution and then from there people can do what they want with it Quote Link to post Share on other sites
MT Predator 2,294 Posted September 19, 2012 Report Share Posted September 19, 2012 I can see how it is constructed but surely there is a way to keep it all together. Maybe a roll pin fit tightly through the tube portion riding in slots cut in the sides of the butt stock portion? 1 Quote Link to post Share on other sites
BB1980 71 Posted September 20, 2012 Report Share Posted September 20, 2012 (edited) He needs a way to keep the locking pin in the buttstock just high enough out of the position holes but not enough to come out of the buffer tube guide slot. It looks like he completely removed the locking lever and pin from the stock. Edited September 20, 2012 by BB1980 Quote Link to post Share on other sites
mattv2099 44 Posted September 20, 2012 Author Report Share Posted September 20, 2012 I can see how it is constructed but surely there is a way to keep it all together. Maybe a roll pin fit tightly through the tube portion riding in slots cut in the sides of the butt stock portion? There are lots of ways. Ryans bumpinator is kept together. Mine is not. I just want to show the simplest version that works and let everyone else add whatever they want to it. He needs a way to keep the locking pin in the buttstock just high enough out of the position holes but not enough to come out of the buffer tube guide slot. It looks like he completely removed the locking lever and pin from the stock. Yes. Mine has the locking mechanism removed. Ryans mechanism is set up so he can quickly remove and reinstall it. His tube that the stock rides on is milled out. My tube is like new so I just disabled the locking mech. Quote Link to post Share on other sites
MT Predator 2,294 Posted September 21, 2012 Report Share Posted September 21, 2012 He needs a way to keep the locking pin in the buttstock just high enough out of the position holes but not enough to come out of the buffer tube guide slot. It looks like he completely removed the locking lever and pin from the stock. Fill in the position holes and make it really smooth in the guide slot maybe? Quote Link to post Share on other sites
mattv2099 44 Posted January 26, 2013 Author Report Share Posted January 26, 2013 This one got a lot of views so I'll update it. Here's the how to vid: http://www.youtube.com/watch?v=ul-qtBt33ek Quote Link to post Share on other sites
augiegee 0 Posted February 20, 2013 Report Share Posted February 20, 2013 Looks great and looked like it worked great also, I have an AK but the only thing is it is a under folder and I have not seen anything for making one of those into a bump fire. I take it back I did see one where the guy did it just using the pistol grip but I didn't like the way it fit all lose tho it did work good. Does anyone have an idea or know what would be a good way to make something for the under folder model of the AK into a bump fire? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.