Vultite 57 Posted October 6, 2012 Report Share Posted October 6, 2012 Since I had the handy trigger pull gauge out, thought I would share what a little elbow grease + Wolff Springs can do to your revolver. The Ruger had a really stiff DA trigger pull of around 10lb's and that annoyed the hell out of me. Just replacing the trigger and hammer spring alone dropped it down to a more manageable pull. http://www.youtube.com/watch?v=WzURE2_HSpA 1 Quote Link to post Share on other sites
22_Shooter 1,560 Posted October 6, 2012 Report Share Posted October 6, 2012 I bought the Wilson Combat spring kit for my spurless DAO SP101. Never got to install them before I left SC, though. Did you have any issues with light strikes or anything after the spring swap? Quote Link to post Share on other sites
Vultite 57 Posted October 6, 2012 Author Report Share Posted October 6, 2012 (edited) I bought the Wilson Combat spring kit for my spurless DAO SP101. Never got to install them before I left SC, though. Did you have any issues with light strikes or anything after the spring swap? zero issues, already had hundreds of rounds downrange with it (.38, .357, .38 +P) Edited October 6, 2012 by Vultite Quote Link to post Share on other sites
banshee 69 Posted October 6, 2012 Report Share Posted October 6, 2012 I put a Wolff spring kit in my Alaskan and it made a huge difference. Well worth the cost and no problems with misfires or any other problems 1 Quote Link to post Share on other sites
XD45 7,124 Posted February 7, 2013 Report Share Posted February 7, 2013 I'll have to do the Wolf springs for my SP101. Once I get one. lol I've been wanting one for years but always had other priorities. Then last week I started looking again and there are none to be found except on GB. And those are overpriced. But I can wait. The panic will end eventually, and it's a 5 shot revolver. Those should be the last things to get banned. Quote Link to post Share on other sites
Ronin38 2,117 Posted February 7, 2013 Report Share Posted February 7, 2013 I like my SP101, never really thought about making adjustments. What's a good source for the Wolff kit? Easy to install? (I did my Saiga12 conversion myself.) Quote Link to post Share on other sites
macbeau 902 Posted February 7, 2013 Report Share Posted February 7, 2013 (edited) I did the Wolff spring conversion on my SP101 in 2000, and the DA trigger is now AWESOME. Not much different on SA, but that wasn't the point. Easy to do and I got the kit from Midway. Macbeau sends... Edited February 7, 2013 by macbeau 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.