Jump to content


Photo
- - - - -

Simple 922r on the 16" V2 Vepr


  • Please log in to reply
6 replies to this topic

#1 liberty -r- death

liberty -r- death

    I walk where the devil dances. . .

  • Contributor
  • PipPipPipPipPip
  • 2,490 posts
  • Gender:Male
  • Location:FOID country

Posted 21 November 2012 - 02:24 PM

I'm done for now, at least until I have some more fun money. Keeping this one simple. I put in a Tapco G2 trigger assembly, bullet guide, flash suppresor, and Bulgy Cirlce 10 with US floor plates.

Broke my tap on this one, not suprising really, so I had to punch it out. Decided rather than buying another tap I'd go the route of using a steel rivet. Took about 5 minutes for the rivet vs. 30 minutes or so to tap it. Think I'll be using the rivet method from here on out. Should be pretty handy for the couple of firends I'm going to help on their Vepr's.

I can't recall off hand who mentioned the rivet method, but I picked up on it, and man I like it. Thank you for a great tip!

Here's a pic.

Attached File  DSC_0159.JPG   178.95KB   2 downloads

Edited by liberty -r- death, 21 November 2012 - 02:25 PM.

  • Dad2142Dad and Captain Hero like this
- even a blind squirrel finds a nut once in a while -
- Obuhmer won the election, we're fucked, keep on prepping -

#2 Captain Hero

Captain Hero

    Dont Give Up The Ship!

  • Contributor
  • PipPipPipPipPip
  • 7,188 posts
  • Gender:Male
  • Location:The Dirty South

Posted 21 November 2012 - 08:35 PM

They look so good with hi caps and the thumbhole stock. Posted Image I never tried the rivet method. Keep us posted to see how it works out in the longer duration of things. Were you able to get a long enough rivet to bite on the other side of the trunnion? .

Captain hero u always have a slutty avatar, u don't get laid do u u fat fuckin retard. Serve ur fucking country and suck a dick.


#3 liberty -r- death

liberty -r- death

    I walk where the devil dances. . .

  • Contributor
  • PipPipPipPipPip
  • 2,490 posts
  • Gender:Male
  • Location:FOID country

Posted 21 November 2012 - 11:35 PM

I tried a 6mm long and it was too long. Moved to the 3mm long and it works perfect. The 3mm passes through and is long enough the get a good flare.

The high cap mags and flash suppreser makes it look like an AK.

Edited by liberty -r- death, 21 November 2012 - 11:39 PM.

  • Captain Hero likes this
- even a blind squirrel finds a nut once in a while -
- Obuhmer won the election, we're fucked, keep on prepping -

#4 mikebaker1129

mikebaker1129

    Advanced Member

  • Contributor
  • PipPip
  • 239 posts
  • Gender:Male

Posted 26 November 2012 - 09:19 PM

Seems like alot of taps are breaking on these ! Did you have any issues with taps on your other bullet guides ?
What size Tap were you using ?
I plan on using a Dinzag tap.

#5 liberty -r- death

liberty -r- death

    I walk where the devil dances. . .

  • Contributor
  • PipPipPipPipPip
  • 2,490 posts
  • Gender:Male
  • Location:FOID country

Posted 26 November 2012 - 09:26 PM

I tapped my other Vepr with no issues. I used the tap supplied by Carolina Shooter Supply.
- even a blind squirrel finds a nut once in a while -
- Obuhmer won the election, we're fucked, keep on prepping -

#6 tbryanh

tbryanh

    Advanced Member

  • Member
  • PipPip
  • 272 posts

Posted 23 April 2014 - 04:13 PM

I tried a 6mm long and it was too long. Moved to the 3mm long and it works perfect. The 3mm passes through and is long enough the get a good flare.

I wouldn't mind seing pictures of both sides of the installed rivet if its not too much of a hassle.



#7 liberty -r- death

liberty -r- death

    I walk where the devil dances. . .

  • Contributor
  • PipPipPipPipPip
  • 2,490 posts
  • Gender:Male
  • Location:FOID country

Posted 26 April 2014 - 09:00 PM

Sorry I no longer have the rifle to take photos for you.
- even a blind squirrel finds a nut once in a while -
- Obuhmer won the election, we're fucked, keep on prepping -




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users