HighPlainsDrifter 466 Posted March 4, 2013 Report Share Posted March 4, 2013 While I was at the range today I lost the security nut and possibly a spring to the magwell/LRBHO. Take a look at the picture, I need help identifying what's missing and how should I go ahead replacing the parts? From what I know the only option for OEM is rusmilitary. That's fine but I will have to come up with a substitute in the mean time. Anyone have any ideas? Quote Link to post Share on other sites
Aust 10 Posted March 4, 2013 Report Share Posted March 4, 2013 Check out one of my recent topics on lrbho There are pics on there Quote Link to post Share on other sites
HighPlainsDrifter 466 Posted March 4, 2013 Author Report Share Posted March 4, 2013 (edited) So I found the pic you mentioned and I'm posting it here for reference. Looks like I am missing the 0-13 nut and the 0-14 spring. I have a few more questions... Can the nut and spring be found somewhere else or fabricated? If fabricated anyone willing to do the work? They will need to be replaced or the LRBHO should be taken out before I go shooting again. Can I swap it out for a standard BHO until I get the needed parts for the LRBHO? @ AustenW: Did you get the LRBHO retro fit installed? Edited March 4, 2013 by HighPlainsDrifter Quote Link to post Share on other sites
pedal2alloy 206 Posted March 5, 2013 Report Share Posted March 5, 2013 None of those parts are available right now. You could adapt a spring from a hardware store, and you may be able to find a metric nut that will fit. Both of those things would be a lot easier than taking the mechanism off or changing to a regular BHO 1 Quote Link to post Share on other sites
JDeko 792 Posted December 2, 2015 Report Share Posted December 2, 2015 Removing the retaining lock seems quite difficult as the lever gets in the way and I'm not sure how one removes that. So it does seem the easiest option is fixing it, though sadly I don't know how to do that myself since I can't walk into the hardware store with my shotgun in tow. Quote Link to post Share on other sites
evlblkwpnz 3,418 Posted December 3, 2015 Report Share Posted December 3, 2015 (edited) Pull it up and rotate it. Lever will come out easily, assuming the hammer axis pin is not in the weapon. Edited December 3, 2015 by evlblkwpnz 1 Quote Link to post Share on other sites
JDeko 792 Posted December 3, 2015 Report Share Posted December 3, 2015 I imagine it is since I did not actively remove it [the hammer axis pin] and don't know how to take out more than the spring and bolt [basic strip of the weapon]. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.