cvhanh20 1,052 Posted April 5, 2013 Report Share Posted April 5, 2013 Hey all you Vepr 12 Freaks I have a little teaser for ya, check it out! We are going to start production this next month on the Chaos Vepr12 rail. The rail height is very close to the factory POS rail currently mounted to the dust cover. We are looking at the back section and more than likely will put out a back rail as well that will match our front rail height. This rail comes in around 12 oz. The cost has not been factored in yet, but soon. 10 Quote Link to post Share on other sites
avnate 335 Posted April 5, 2013 Report Share Posted April 5, 2013 TITS! 2 Quote Link to post Share on other sites
HighPlainsDrifter 466 Posted April 5, 2013 Report Share Posted April 5, 2013 I am crossing my fingers that will mount on the builds Legion is importing as well... 1 Quote Link to post Share on other sites
Qeth 5 Posted April 5, 2013 Report Share Posted April 5, 2013 Quote Link to post Share on other sites
Mullet Man 2,114 Posted April 5, 2013 Report Share Posted April 5, 2013 I don't care for a front rail of any sort or location. I am interested in your replacement top cover rail piece however...hurry up and knock that out. 1 Quote Link to post Share on other sites
Muffman 54 Posted April 5, 2013 Report Share Posted April 5, 2013 I know weird question... but please tell me that mounting the front top rail cover is optional and the bottom rail grip is secure without it... 1 Quote Link to post Share on other sites
SHOTGUNWIN 1 Posted April 6, 2013 Report Share Posted April 6, 2013 Aluminium picatinny rail as a replacement piece for the original polmer rail, please ... 1 Quote Link to post Share on other sites
Lone Star Arms 2,047 Posted April 6, 2013 Report Share Posted April 6, 2013 Looks great, Cam! 1 Quote Link to post Share on other sites
menace667 194 Posted April 6, 2013 Report Share Posted April 6, 2013 This!!!!!! I look everyday for a preorder. Can not wait to mount this to my VEPR. Quote Link to post Share on other sites
dougkellermann 8 Posted April 6, 2013 Report Share Posted April 6, 2013 I have a chubby.... Quote Link to post Share on other sites
GIJOE79 0 Posted April 6, 2013 Report Share Posted April 6, 2013 Cameron Hadley please tell me it also fits the legions too. Quote Link to post Share on other sites
thebuns1 4,323 Posted April 6, 2013 Report Share Posted April 6, 2013 Way to go Cam. You are going to make me spend even more money that I shouldnt. You do good work sir. Thank you for that. 3 Quote Link to post Share on other sites
DresNightfire 39 Posted April 7, 2013 Report Share Posted April 7, 2013 (edited) WINNER! Any plans to make the sides or bottom modular in the future? Edited April 7, 2013 by DresNightfire Quote Link to post Share on other sites
dougkellermann 8 Posted April 7, 2013 Report Share Posted April 7, 2013 Where do I send my money.... The subject is Here.... I need the quad rail.... Quote Link to post Share on other sites
cvhanh20 1,052 Posted April 8, 2013 Author Report Share Posted April 8, 2013 I know weird question... but please tell me that mounting the front top rail cover is optional and the bottom rail grip is secure without it... You can. But they will sell as a pair. WINNER! Any plans to make the sides or bottom modular in the future? As in bolt on rails, not at this point. Cameron Hadley please tell me it also fits the legions too. Haven't had one in my hands, but I'm sure we'll know soon enough. Quote Link to post Share on other sites
cvhanh20 1,052 Posted April 8, 2013 Author Report Share Posted April 8, 2013 I don't care for a front rail of any sort or location. I am interested in your replacement top cover rail piece however...hurry up and knock that out. If all you're looking for is just the top rail, Carolina Shooters Supply carries a replacement rail. The only reason I'm considering making one is so they are the same height and they can be sold as a complete upgrade. 1 Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted April 8, 2013 Report Share Posted April 8, 2013 Great looking design Cameron! As usual.... 2 Quote Link to post Share on other sites
traintrax 12 Posted April 8, 2013 Report Share Posted April 8, 2013 That looks like a must have. I like your idea of replacing the poly rail to bring it up to the height of the front rail, Quote Link to post Share on other sites
DresNightfire 39 Posted April 9, 2013 Report Share Posted April 9, 2013 I don't care for a front rail of any sort or location. I am interested in your replacement top cover rail piece however...hurry up and knock that out. If all you're looking for is just the top rail, Carolina Shooters Supply carries a replacement rail. The only reason I'm considering making one is so they are the same height and they can be sold as a complete upgrade. I'm in for the complete upgrade...I know a good number of us want to scrap the polymer factory rail ASAP. Quote Link to post Share on other sites
Mullet Man 2,114 Posted April 9, 2013 Report Share Posted April 9, 2013 I don't care for a front rail of any sort or location. I am interested in your replacement top cover rail piece however...hurry up and knock that out. If all you're looking for is just the top rail, Carolina Shooters Supply carries a replacement rail. The only reason I'm considering making one is so they are the same height and they can be sold as a complete upgrade. 10-4 Quote Link to post Share on other sites
doodi1 23 Posted April 9, 2013 Report Share Posted April 9, 2013 Looking Good! Quote Link to post Share on other sites
kuston 9 Posted May 26, 2013 Report Share Posted May 26, 2013 Is Chaos Rail for the Vepr 12 available yet? I keep checking the web site and don't see it listed anywhere, even under the "top secret" area. It seems like months ago the photo of it was posted. Quote Link to post Share on other sites
jdtravers 637 Posted May 26, 2013 Report Share Posted May 26, 2013 Nice!! Quote Link to post Share on other sites
Mountain Man 20 Posted May 27, 2013 Report Share Posted May 27, 2013 (edited) I got this from Chaos after asking the same question, I know it seems like forever they posted that picture forever ago... Sorry for the delayed response, the Vepr 12 quad rail will be available to order in a couple weeks. They will be finished and shipping shortly after that. Edited May 27, 2013 by Mountain Man Quote Link to post Share on other sites
ShadyVepr 10 Posted May 27, 2013 Report Share Posted May 27, 2013 I think I would grind off most or all ot the rail on the bottom they might be a bit rough to hold on to. Quote Link to post Share on other sites
DresNightfire 39 Posted May 27, 2013 Report Share Posted May 27, 2013 I think I would grind off most or all ot the rail on the bottom they might be a bit rough to hold on to. I recommend using rail cover. You never know when you will want to add a foregrip/AFG, flashlight bipod, flashlight foregrip, or bipod (for use with rifled slugs with a rifled VEPR 12 barrel) in the future. Quote Link to post Share on other sites
menace667 194 Posted May 28, 2013 Report Share Posted May 28, 2013 I agree with dres. I would stick some rail covers on it and keep it as made. Once this and the bonesteel pad drop i will be a happy camper for sure. Then i can finally decide on my optic to use and be a happy camper. I saw where certain optics on the stock polymer rail on the dust cover was causing FTE and was curious if the added height of the replacement part would have any impact in that since the clearance will be greater. Possibly allow placement of an Eotech in the middle of the rail instead of all the way back. If anyone had an XPS series and plans to get one of these rails a test would be nice. Quote Link to post Share on other sites
Mountain Man 20 Posted May 28, 2013 Report Share Posted May 28, 2013 Menace were you thinking about any other optics? I was between the XPS 2 and Burris FF3. If Chaos puts out a new dust cover with rail it might fix the optic problem, but I believe the issue was the rivet in the middle of the cover that comes into contact with moving parts when mounted in the middle. So if it was just a new rail that is taller I wonder if it would actually fix the problem....Hard to know, thinking out loud, any thoughts? Quote Link to post Share on other sites
ec4321 113 Posted May 28, 2013 Report Share Posted May 28, 2013 The problem with certain optics in certain positions on the stock rail has to do with shells hitting the optic when they are ejected and causing FTEs, etc. There isn't much room there. Nothing to do with rivets AFAIK. Quote Link to post Share on other sites
menace667 194 Posted May 28, 2013 Report Share Posted May 28, 2013 Mountain Man, As I understand it the width of the optics on the dust cover rail were causing the shell to not eject fully. There was a video not too long ago in super slow motion that showed the shell strike the side of an EOTECH and go back into the ejection port, causing a failure. The clearance issue seemed like a very small adjustment could resolve it so I am curious if the height difference with the Chaos replacement will be the cure. Personally I am a huge Eotech fan and ran them on my AR (sold my old one and need to get a new one). Also wanted to try out either a mepro m21 or trijicon reflex type since they are completely dummy proof and rock solid. My only hang up on going with an Eotech is there is nowhere to store spare batteries on my VEPR like I have on my AR. I suppose i could replace the grip but I need space for atleast three batteries with my Elzetta light that's going on it plus the spare for the Eotech. I have not seen any grip capable of holding three spare cr123's yet. I suppose one of those rail mount storage compartments would work, but in pictures they look tacky. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.