922 list for Saiga 7.62x39?

[cleveland 0]

I could not find a list for the rifle, but I did find this list is for the shotgun. How do the lists differ, if at all? If they are different, please point me in the right direction.

 

Here is a complete parts count for a Saiga shotgunwith a removable choke and a pistol grip:

 

(1) Receiver---------------------------------------------------------------------Russian

(2) Barrels-----------------------------------------------------------------------Russian

(3) Barrel extensions ---------------------------------DOES NOT EXIST ON SAIGA

(4) Mounting blocks,trunion -------------------------DOES NOT EXIST ON SAIGA

(5) Muzzle attachments-------------------------------------------------------Russian

(6) Bolts-------------------------------------------------------------------------Russian

(7) Bolt carriers-----------------------------------------------------------------Russian

(8) Operating rods -----------------------------------DOES NOT EXIST ON SAIGA

(9) Gas pistons----------------------------------------------------------------Russian

(10) Trigger housings -------------------------------DOES NOT EXIST ON SAIGA

(11) Triggers================================ US COMPLIANT

(12) Hammers=============================== US COMPLIANT

(13) Sears ---------------------------------------------DOES NOT EXIST ON SAIGA

(14) Disconnectors============================ US COMPLIANT

(15) Buttstock=============================== US COMPLIANT

(16) Pistol grips============================== US COMPLIANT

(17) Forearms, handguards--------------------------------------------------Russian

(18) Magazine bodies---------------------------------------------------------Russian

(19) Followers------------------------------------------------------------------Russian

(20) Floorplates ---------------------------------------------------------------Russian

 

Thanks

Edited December 9, 2005 by cleveland

[SaigaShooter 0]

That looks right to me, dont need to worry about the muzzle attatchment though, the Saiga rifles don't have one.

[jimmbswu 0]

The Saiga rifles all have a trunion, whereas the shotguns do not.

 

Therefore, the rifles have 14 foreign parts, whereas the shotguns have 13.

[dinzag 31]

That looks right to me, dont need to worry about the muzzle attatchment though, the Saiga rifles don't have one.

Unless you add one...

[cleveland 0]

PARTS LIST

 

1. Trigger mechanism 49. Screw

2. Receiver cover 50. Forearm support

3. Mainspring 51. Swivel base

4. Spring 52. Washer

5. Magazine catch 53. Swivel screw

6. Catch spring 54. Nut

7. Catch pin 55. Swivel ring

8. Hammer 56. Magazine body

9. Trigger mechanism pin 57. Magazine spring

10. Trigger 58. Follower

11. Lever 59. Locking plate

12. Trigger pin 60. Magazine cover

13. Receiver assembly 61. Guide

14. Gas tube assembly 62. Handle

15. Selector with sector 63. Catch

16. Hand-guard axle pin 64. Screw

17. Sight leaf with hand-guard axle pin 65. Washer

18. Gas tube assembly 66. Screw

19. Barrel 67. Bush

20. Front-sight base 68. Post

21. Front-sight base 69. Clamp

22. Front Sight 70. Pin

23. Gas tube spring 71. Pin

24. Gas cylinder 72. Adaptor

25. Sight leaf 73. Bolt M4-6gxl6.58.05

26. Sight-leaf slide 74. Screw Bl.M4-6gXl2.58.05

27. Slide catch 75. Screw Bl.M4-6gXl6.58.05

28. Slide-catch spring 76. Screw Bl.M4-6gXl2.58.05

29. Sight-leaf spring 77. Screw Bl.M4-6gXl6.58.05

30. Bolt support assembly 78. Washer C.4.01.05

31. Bolt

32. Firing pin

33. Extractor spring

34. Firing pin stud

35. Extractor pin

36. Extractor

37. Return spring guide

38. Return spring

39. Sleeve

40. Rod

41. Butt

42. Butt wood screw

43. Rosette

44. Buttplate assembly

45. Swivel ring

46. Swivel base

47. Swivel wood screw

48. Forearm

 

OK. In comparing the list from the Saiga manual (above) to the list at the top of this page from my first post, I have some questions. Please note that I could not find #4, and #14.

 

(1) Receiver. #2 Receiver cover, #13 Receiver assembly. ***Does the receiver cover count?***

(2) Barrels. #19 barrel.

(3) Barrel extensions. ***N/A unless I add one, then it must be made in the USA. Right?***

(4) Mounting blocks, trunion. ***I couldn't find this on the parts list.***

(5) Muzzle attachments. N/A (Is this in reference to the chokes?)

(6) Bolts. #31 bolt

(7) Bolt carrier. #30 Bolt support assembly. ***Is this the correct part?***

(8) Operating rod. N/A

(9) Gas pistons. #14-#18. ***Is this the correct part?*** ***Why is it listed as 4 different parts?***

(10) Trigger housing. N/A

(11) Triggers. #10 trigger, #1 Trigger mechanism. ***Is #1 counted as part of the trigger?***

(12) Hammers. #8 Hammer.

(13) Sears. N/A

(14) Disconnectors. ***I couldn't find this on the parts list.***

(15) Buttstock. #41 Butt.

(16) Pistol Grip. ***N/A unless I add one, then it must be made in the USA. Right?***

(17) Forearms, handguards. #48 Forearm.

(18) Magazine bodies. #56 Magazine body.

(19) Followers. #58 Follower.

(20) Floorplates. #60 Magazine cover. **Is this another name for is, or am I looking at the wrong part?**

 

If I was not clear on any of my question, please let me know.

 

Thanks, cleveland.

[jtoddellis 2]

If you plan to convert this is what it will take to become compliant:

U.S. made Fire Control Group 3 parts (trigger, hammer, disconector)

U.S. made Buttstock 1 part

U.S. made Pistol Grip 1 Part

 

That will be enough to make your gun compliant.

 

Other options are:

U.S. made Gas Piston

U.S. made hand guards

U.S. made Magazines or Floor plates and Folowers

[SaigaShooter 0]

The Saiga rifles all have a trunion, whereas the shotguns do not.

 

Therefore, the rifles have 14 foreign parts, whereas the shotguns have 13.

 

good catch, can't belive i missed that one.