Jump to content

Square Back 223 Stocks


Recommended Posts

Okay, so I was looking at the 223 Vepr at Centerfire for 699 and I was wondering about the stocks it takes. The guy at Centerfire swears they take a regular AK stock but I was trying to figure out how. I know the Vepr RPK receivers are thicker and usually you have to use a RPK receiver so I was trying to figure out how that works. Granted my experience is limited to my Vepr 12 which I have the Bonesteel RPK Galil Style stock on, that I am refrencing. Can someone help me understand, I got to a point on the phone where we just stalemated because the guy couldn't explain how or why they took regular stocks, just that they did. I am 100% okay with being wrong I just want to know why, thanks for the help.

Link to post
Share on other sites

Okay, so I was looking at the 223 Vepr at Centerfire for 699 and I was wondering about the stocks it takes. The guy at Centerfire swears they take a regular AK stock but I was trying to figure out how. I know the Vepr RPK receivers are thicker and usually you have to use a RPK receiver so I was trying to figure out how that works. Granted my experience is limited to my Vepr 12 which I have the Bonesteel RPK Galil Style stock on, that I am refrencing. Can someone help me understand, I got to a point on the phone where we just stalemated because the guy couldn't explain how or why they took regular stocks, just that they did. I am 100% okay with being wrong I just want to know why, thanks for the help.

I had to shave off about 1/16th on each side going back and forth til it fit. In my experience, they do not fit without modification.

Link to post
Share on other sites

 

Okay, so I was looking at the 223 Vepr at Centerfire for 699 and I was wondering about the stocks it takes. The guy at Centerfire swears they take a regular AK stock but I was trying to figure out how. I know the Vepr RPK receivers are thicker and usually you have to use a RPK receiver so I was trying to figure out how that works. Granted my experience is limited to my Vepr 12 which I have the Bonesteel RPK Galil Style stock on, that I am refrencing. Can someone help me understand, I got to a point on the phone where we just stalemated because the guy couldn't explain how or why they took regular stocks, just that they did. I am 100% okay with being wrong I just want to know why, thanks for the help.

I had to shave off about 1/16th on each side going back and forth til it fit. In my experience, they do not fit without modification.

 

Second that. I had to shave a bit off a KVAR stock to get it into my Vepr12.

Link to post
Share on other sites

 

Okay, so I was looking at the 223 Vepr at Centerfire for 699 and I was wondering about the stocks it takes. The guy at Centerfire swears they take a regular AK stock but I was trying to figure out how. I know the Vepr RPK receivers are thicker and usually you have to use a RPK receiver so I was trying to figure out how that works. Granted my experience is limited to my Vepr 12 which I have the Bonesteel RPK Galil Style stock on, that I am refrencing. Can someone help me understand, I got to a point on the phone where we just stalemated because the guy couldn't explain how or why they took regular stocks, just that they did. I am 100% okay with being wrong I just want to know why, thanks for the help.

 

I had to shave off about 1/16th on each side going back and forth til it fit. In my experience, they do not fit without modification.

Was that on a square back Vepr?

Link to post
Share on other sites

 

 

Okay, so I was looking at the 223 Vepr at Centerfire for 699 and I was wondering about the stocks it takes. The guy at Centerfire swears they take a regular AK stock but I was trying to figure out how. I know the Vepr RPK receivers are thicker and usually you have to use a RPK receiver so I was trying to figure out how that works. Granted my experience is limited to my Vepr 12 which I have the Bonesteel RPK Galil Style stock on, that I am refrencing. Can someone help me understand, I got to a point on the phone where we just stalemated because the guy couldn't explain how or why they took regular stocks, just that they did. I am 100% okay with being wrong I just want to know why, thanks for the help.

I had to shave off about 1/16th on each side going back and forth til it fit. In my experience, they do not fit without modification.

Was that on a square back Vepr?

 

Yes sir. I have done it to my Vepr 12 and also AES10b.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Chatbox

    Load More
    You don't have permission to chat.
×
×
  • Create New...