thefitter 5 Posted July 18, 2013 Report Share Posted July 18, 2013 Can not seem to understand how to lock this in the up position. It locks in the down position. Thanks Quote Link to post Share on other sites
nexus 0 Posted July 20, 2013 Report Share Posted July 20, 2013 It doesn't lock in the up position, probably because if it did, it could snap off were the shotgun dropped. Notice the notches and pin as you adjust the positioning. All the positioning notches are very shallow except the down position notch. You could easily mod it to lock in the up position by extending the notch to match the depth of the one for the down position. It would only take a minute, but to make it look clean you'd want to do it with an endmill in a drill press or mill. Quote Link to post Share on other sites
thefitter 5 Posted July 20, 2013 Author Report Share Posted July 20, 2013 It doesn't lock in the up position, probably because if it did, it could snap off were the shotgun dropped. Notice the notches and pin as you adjust the positioning. All the positioning notches are very shallow except the down position notch. You could easily mod it to lock in the up position by extending the notch to match the depth of the one for the down position. It would only take a minute, but to make it look clean you'd want to do it with an endmill in a drill press or mill. Thanks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.