Jump to content

my 9mm SBR build...


Recommended Posts


So I know it's been forever since I've hanged around here and it's because I've been really damn busy lol. But I'm slowly piecing together my SBR build finally and of course in that ridiculously long wait for my stamp (man, a couple of years ago a stamp would be 90 days or less) but here's where I'm at so far and wanted to share my build with you:

 

Stag lower

KNS anti-rotation pins

7.5" 9mm upper from JSE

RRA magwell block

RRA 9mm buffer

Larue handstops/rail clips

Strike Ind charging handle

Umbrella Corp grip (which will be stippled by me soon)

Magpul Mbuis

a bunch of Uzi mags with the proper mods smile.png 

 

SO, I made a short video of the latest on my rifle including a comparison of Strike Ind's new charging handle vs standard and how I setup my larue handstop/clip system. The reason why I did the video is because Strike's handle is new to the market and I think a great value at only $30, but that's just IMO.

 

http://youtu.be/vwBU2qGlWms

Link to post
Share on other sites

 

So I know it's been forever since I've hanged around here and it's because I've been really damn busy lol. But I'm slowly piecing together my SBR build finally and of course in that ridiculously long wait for my stamp (man, a couple of years ago a stamp would be 90 days or less) but here's where I'm at so far and wanted to share my build with you:

 

Stag lower

KNS anti-rotation pins

7.5" 9mm upper from JSE

RRA magwell block

RRA 9mm buffer

Larue handstops/rail clips

Strike Ind charging handle

Umbrella Corp grip (which will be stippled by me soon)

Magpul Mbuis

a bunch of Uzi mags with the proper mods :) 

 

SO, I made a short video of the latest on my rifle including a comparison of Strike Ind's new charging handle vs standard and how I setup my larue handstop/clip system. The reason why I did the video is because Strike's handle is new to the market and I think a great value at only $30, but that's just IMO.http://youtu.be/vwBU2qGlWms

I had to troll on your video. I just couldn't help myself... Great build by the way. Looks real good. Does it shoot as good as it looks?

Link to post
Share on other sites

 

So I know it's been forever since I've hanged around here and it's because I've been really damn busy lol. But I'm slowly piecing together my SBR build finally and of course in that ridiculously long wait for my stamp (man, a couple of years ago a stamp would be 90 days or less) but here's where I'm at so far and wanted to share my build with you:

 

Stag lower

KNS anti-rotation pins

7.5" 9mm upper from JSE

RRA magwell block

RRA 9mm buffer

Larue handstops/rail clips

Strike Ind charging handle

Umbrella Corp grip (which will be stippled by me soon)

Magpul Mbuis

a bunch of Uzi mags with the proper mods smile.png 

 

SO, I made a short video of the latest on my rifle including a comparison of Strike Ind's new charging handle vs standard and how I setup my larue handstop/clip system. The reason why I did the video is because Strike's handle is new to the market and I think a great value at only $30, but that's just IMO.http://youtu.be/vwBU2qGlWms

I had to troll on your video. I just couldn't help myself... Great build by the way. Looks real good. Does it shoot as good as it looks?

 

Thanks! Yes, it shoots great!! I ordered the wrong attachment for my silencer so when I get the correct thread pattern I'll give that a test as well. The wait for the stamp is killing me!! Over 6 months and likely 2-3 more to go unless they surprise me.

Link to post
Share on other sites

Very nicely done. I was looking to build something  very much on those lines before I got hooked on the notion of a tavor. 

 

 

I'd prefer something narrower than a quad, and skip the rail covers, but that's just my preference. I do like how you have those handstops.

 

Umbrella Corp straight up says they expect their customers to stipple the grips, which is why they leave a blank texture. They are trying to leave a blank slate that won't mess up your design. 

 

If I had an AR, it would have an umbrella corp grip on it. I like the more vertical angle so I can comfortably hold the gun in tighter.

 

How much will you have into it when done?

Link to post
Share on other sites

I cant help but notice you have a collapsible, rifle buffer tube on your "pistol." You would need to install an actual smooth, round, tube for the ATF to see it as a pistol otherwise all you need to due is slap on a stock and your SBR complete prior to Form 4 approval.

 

Just my .02

 

Gunny NR

Link to post
Share on other sites

Found this letter on ar15.com

post-34181-0-88724500-1380122435_thumb.jpg

 

So according to this it is legal to use one as long as you don't have a stock to put on it. (Who doesn't have ar stocks though? Lol) I would at least cover it up with a foam sleeve, para cord, or something like that. Better safe than sorry.

Link to post
Share on other sites

Found this letter on ar15.com

attachicon.gifimage.jpg

 

So according to this it is legal to use one as long as you don't have a stock to put on it. (Who doesn't have ar stocks though? Lol) I would at least cover it up with a foam sleeve, para cord, or something like that. Better safe than sorry.

 

 

Yeah, I'm totally safe in this aspect because I have NO ar stocks laying around. My stock for this gun is still on order from mission first tactical for a very long time because it's the new minimalist stock. So its very likely my stamp will arrive before my stock. Either way, I already knew I was safe lol. I found the same letter and I'm not sweating it.

Very nicely done. I was looking to build something  very much on those lines before I got hooked on the notion of a tavor. 

 

 

I'd prefer something narrower than a quad, and skip the rail covers, but that's just my preference. I do like how you have those handstops.

 

Umbrella Corp straight up says they expect their customers to stipple the grips, which is why they leave a blank texture. They are trying to leave a blank slate that won't mess up your design. 

 

If I had an AR, it would have an umbrella corp grip on it. I like the more vertical angle so I can comfortably hold the gun in tighter.

 

How much will you have into it when done?

With tax stamp about $1200 complete. Umbrella will be releasing a textured grip according to their reps, but still have the non-textured ones available as well.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Chatbox

    Load More
    You don't have permission to chat.
×
×
  • Create New...