Vultite 57 Posted September 23, 2013 Report Share Posted September 23, 2013 So I know it's been forever since I've hanged around here and it's because I've been really damn busy lol. But I'm slowly piecing together my SBR build finally and of course in that ridiculously long wait for my stamp (man, a couple of years ago a stamp would be 90 days or less) but here's where I'm at so far and wanted to share my build with you: Stag lower KNS anti-rotation pins 7.5" 9mm upper from JSE RRA magwell block RRA 9mm buffer Larue handstops/rail clips Strike Ind charging handle Umbrella Corp grip (which will be stippled by me soon) Magpul Mbuis a bunch of Uzi mags with the proper mods SO, I made a short video of the latest on my rifle including a comparison of Strike Ind's new charging handle vs standard and how I setup my larue handstop/clip system. The reason why I did the video is because Strike's handle is new to the market and I think a great value at only $30, but that's just IMO. http://youtu.be/vwBU2qGlWms Quote Link to post Share on other sites
EthanM 514 Posted September 23, 2013 Report Share Posted September 23, 2013 So I know it's been forever since I've hanged around here and it's because I've been really damn busy lol. But I'm slowly piecing together my SBR build finally and of course in that ridiculously long wait for my stamp (man, a couple of years ago a stamp would be 90 days or less) but here's where I'm at so far and wanted to share my build with you: Stag lower KNS anti-rotation pins 7.5" 9mm upper from JSE RRA magwell block RRA 9mm buffer Larue handstops/rail clips Strike Ind charging handle Umbrella Corp grip (which will be stippled by me soon) Magpul Mbuis a bunch of Uzi mags with the proper mods SO, I made a short video of the latest on my rifle including a comparison of Strike Ind's new charging handle vs standard and how I setup my larue handstop/clip system. The reason why I did the video is because Strike's handle is new to the market and I think a great value at only $30, but that's just IMO.http://youtu.be/vwBU2qGlWms I had to troll on your video. I just couldn't help myself... Great build by the way. Looks real good. Does it shoot as good as it looks? Quote Link to post Share on other sites
Vultite 57 Posted September 23, 2013 Author Report Share Posted September 23, 2013 So I know it's been forever since I've hanged around here and it's because I've been really damn busy lol. But I'm slowly piecing together my SBR build finally and of course in that ridiculously long wait for my stamp (man, a couple of years ago a stamp would be 90 days or less) but here's where I'm at so far and wanted to share my build with you: Stag lower KNS anti-rotation pins 7.5" 9mm upper from JSE RRA magwell block RRA 9mm buffer Larue handstops/rail clips Strike Ind charging handle Umbrella Corp grip (which will be stippled by me soon) Magpul Mbuis a bunch of Uzi mags with the proper mods SO, I made a short video of the latest on my rifle including a comparison of Strike Ind's new charging handle vs standard and how I setup my larue handstop/clip system. The reason why I did the video is because Strike's handle is new to the market and I think a great value at only $30, but that's just IMO.http://youtu.be/vwBU2qGlWms I had to troll on your video. I just couldn't help myself... Great build by the way. Looks real good. Does it shoot as good as it looks? Thanks! Yes, it shoots great!! I ordered the wrong attachment for my silencer so when I get the correct thread pattern I'll give that a test as well. The wait for the stamp is killing me!! Over 6 months and likely 2-3 more to go unless they surprise me. Quote Link to post Share on other sites
slostang 80 Posted September 24, 2013 Report Share Posted September 24, 2013 I really like that hand stop setup. Looks perfect for my slide fire'd 7.5" SBR. Quote Link to post Share on other sites
gunfun 3,930 Posted September 24, 2013 Report Share Posted September 24, 2013 Very nicely done. I was looking to build something very much on those lines before I got hooked on the notion of a tavor. I'd prefer something narrower than a quad, and skip the rail covers, but that's just my preference. I do like how you have those handstops. Umbrella Corp straight up says they expect their customers to stipple the grips, which is why they leave a blank texture. They are trying to leave a blank slate that won't mess up your design. If I had an AR, it would have an umbrella corp grip on it. I like the more vertical angle so I can comfortably hold the gun in tighter. How much will you have into it when done? Quote Link to post Share on other sites
MCASgt New River 10,036 Posted September 25, 2013 Report Share Posted September 25, 2013 I cant help but notice you have a collapsible, rifle buffer tube on your "pistol." You would need to install an actual smooth, round, tube for the ATF to see it as a pistol otherwise all you need to due is slap on a stock and your SBR complete prior to Form 4 approval. Just my .02 Gunny NR Quote Link to post Share on other sites
EthanM 514 Posted September 25, 2013 Report Share Posted September 25, 2013 Found this letter on ar15.com So according to this it is legal to use one as long as you don't have a stock to put on it. (Who doesn't have ar stocks though? Lol) I would at least cover it up with a foam sleeve, para cord, or something like that. Better safe than sorry. Quote Link to post Share on other sites
Vultite 57 Posted September 25, 2013 Author Report Share Posted September 25, 2013 Found this letter on ar15.com image.jpg So according to this it is legal to use one as long as you don't have a stock to put on it. (Who doesn't have ar stocks though? Lol) I would at least cover it up with a foam sleeve, para cord, or something like that. Better safe than sorry. Yeah, I'm totally safe in this aspect because I have NO ar stocks laying around. My stock for this gun is still on order from mission first tactical for a very long time because it's the new minimalist stock. So its very likely my stamp will arrive before my stock. Either way, I already knew I was safe lol. I found the same letter and I'm not sweating it. Very nicely done. I was looking to build something very much on those lines before I got hooked on the notion of a tavor. I'd prefer something narrower than a quad, and skip the rail covers, but that's just my preference. I do like how you have those handstops. Umbrella Corp straight up says they expect their customers to stipple the grips, which is why they leave a blank texture. They are trying to leave a blank slate that won't mess up your design. If I had an AR, it would have an umbrella corp grip on it. I like the more vertical angle so I can comfortably hold the gun in tighter. How much will you have into it when done? With tax stamp about $1200 complete. Umbrella will be releasing a textured grip according to their reps, but still have the non-textured ones available as well. Quote Link to post Share on other sites
MCASgt New River 10,036 Posted September 25, 2013 Report Share Posted September 25, 2013 If you received that letter from the ATF then you good to go... however if you simply pulled that offline then I would still be wary. Gunny NR Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.