Coasten 0 Posted October 30, 2013 Report Share Posted October 30, 2013 I've done minor gin work before and absolutely can't stand the look and feel of my sporter stock, seen a few videos on how to do it and look fairly simple but can it be that easy just to buy the parts kit from CSS and do it myself? Any info would be nice on this being i priced getting it done where I live in Oklahoma and they want $700 to do it for me. And of topic I've ran about 100 slugs, 150 3" turkey loads and 300 cheap bulk thru mine since I've had it with the " reliablity kit" and the gun was used when I bought it. Still won't cycle cheap ammo very well. I get maybe 3 shots without a fte at most still. Gun is kept clean, I can see all 3 gas ports, plug is on setting 6. Plenty of grease on all the wear points, I don't know whatelse to do really. Quote Link to post Share on other sites
Mopar14889 1 Posted October 30, 2013 Report Share Posted October 30, 2013 You don't need to buy one of the kits, I converted mine for about $70. If you are even the least bit mechanically inclined you'll be fine with it. Quote Link to post Share on other sites
mamassingale 1 Posted October 30, 2013 Report Share Posted October 30, 2013 It is really easy and there are videos on youtube that will walk you through the process. $700 is a ripoff. parts cost between $70 and $300(depending on the stock set) and it can be converted in about 30 minutes to an hour (depending on your ability). As far as the FTEs go I have the same problem and I've tried everything to fix it. I don't think it is the gun I think it is the inconsistency of the cheaper rounds. some will eject 15ft and other will barely move the bolt. let me know if you find a cure other than buckshot and slugs. I think im just gonna start loading my own shells. Quote Link to post Share on other sites
gunman1 1,753 Posted October 30, 2013 Report Share Posted October 30, 2013 (edited) ^^^^^what he said, it's so simple to do. Just take your time and have fun with it. I haven't got my S20 to shoot the cheap shit either, I quit worrying about it and have become resigned to the fact that it is a battle gun and not designed to shoot cheap ass bird shot. But then again I do know that some people have gotten them to work, not worth it to me, I bought a S12. Edited October 30, 2013 by AA re-cvrd Quote Link to post Share on other sites
Coasten 0 Posted October 30, 2013 Author Report Share Posted October 30, 2013 I've found that anything #6 shot or better will shot and ANYTHING with highbrass will shot. And what internal parts do I need to buy? I don't know is the reason I was going to just buy the parts kit. Quote Link to post Share on other sites
TxAgSaiga1979 16 Posted December 8, 2013 Report Share Posted December 8, 2013 I did my conversion at home, it was my 2nd saiga to do myself. Took longer to re-install the BHO lever and the FCG than it did to disassemble and remove the sporter plate. I have found that the best tool is a small, right-angle disc sander that uses 1" 3M sanding pads. Best way to grind through the plate rivets, but I can throw on a roloc disc and also clean up the corrosion under the plate, etc. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.