devildog1122 0 Posted February 6, 2008 Report Share Posted February 6, 2008 I think all of us here are not trying to give you a hard time, we want to point you in the right direction and keep the forum clean of misguided facts. Is your rifle you can do whatever you want. But I still would like to have those spare parts link Quote Link to post Share on other sites
paprotective 362 Posted February 6, 2008 Report Share Posted February 6, 2008 Yeeaah, pssst, US made (wink)--that's the ticket. It keeps the Govt. happy. I'm happy. Everybody wins. Now if I could just get these guys who are supposed to be on my team to stop busting my balls... Hey sounds good enough for me. 1) He gave us a company name. He does better than I do I don't even keep my receipts. 2) You guys turned a picture post into a linching(sp) So when I get my new Saiga 308 and install a new fire control group for a stock Saiga by Dinzag (3 US made) and a US made butt stock (1) that 'looks' like the orginal (still on decisions) you all are going to chew me out to I guess. Oh and my 25 Round SF's can't forget those. Srouxd, I know spend $180 on a folding ACE (US made) and look like everyone elses Saiga on here. Heaven forbid you want to be DIFFERENT than the group. See I am 'Loner' I can get away with it.... You don't get friends on the internet. Good info and help yes, friends not neccessarily. I think Cobra2, TonyR, and Danzig rock though. again IMHO. Quote Link to post Share on other sites
devildog1122 0 Posted February 6, 2008 Report Share Posted February 6, 2008 Nobody here chewing anyone out. Just point out the fact that his rifle is not legal. Unless he can tell us who made the US made Saigas' parts. We don't care what your rifle look like, as long as it has 10 or less imported parts on it. New FCG in your stock .308, whoever going to put it in, are they going to cut the "TRIGGER" off to fit in the original configuration? Quote Link to post Share on other sites
paprotective 362 Posted February 6, 2008 Report Share Posted February 6, 2008 (edited) Danzig sells a 'DROP-IN' machined FCG (unless I read his site wrong) for STOCK Saiga's. What I am saying is if I didn't explain my 'up-grades' for 922r you folks would probably jump on me also based upon my rifles LOOKs'. I too feel that I shouldn't HAVE to explain my weapons compliance just because it may not LOOK compliant, does not mean it is not. Moto's busting chops because he KNOWs where to get SPARE PARTS, please spare 'me'. I like the stock look with Hi-Cap mags. So mine will APPEAR stock with a Hi-Cap like Srxoud's which will get me 'bashed' till I explain what I have in it. Which I understand will keep the Anti's from "banning" 'our' toys. Like WE as a small group would be able to stop that. yeah, ok. Edited February 6, 2008 by YouWontHearItComing Quote Link to post Share on other sites
Srouxd 0 Posted February 6, 2008 Report Share Posted February 6, 2008 I told you that I would find out when I can. I feel no need to explain myself any further to you. I will find out who made the parts so that you guys can get your spare parts. As for my rifle being Legal, I've already explained it to you twice. It is legal. Say what you want, I don't care. If you don't believe me, it's your own damn problem. God forbid someone have a stock looking Saiga because Lord knows thats a cardinal sin. Just because it looks stock, doesn't mean that it is. I know that my rifle is legal regardless of what any of you tell me, because a state law enforcement official who deals directly with the only people who would do anything about it, told me that it was. So you can sit here all day and tell me I'm wrong and that it's illegal and that I'm ruining your precious Saiga conversion world, and at the end of the day, you're still wrong and I still have a gun that I'm proud of. When I find out where the parts are from, I will most certainly pass that info on to you, but for now, I think that we ought to let this topic get back to what the title says it is, A Picture Post. To show that there are no hard feelings, devildog1122 and motopilot1, post some pics of your guns. I've got some nice non-Saigas that I'm going to post along with new pic of the hot little Russian. BTW, my Saiga and I killed a mange-infested coyote who was at a dead run 80 yards from me. Popped him right behind the ear with a shot that I never thought I'd make. It's my first kill with this little Beauty and I tell you I couldn't be more proud of her. Gun_and_Coyote.wmv Quote Link to post Share on other sites
Srouxd 0 Posted February 6, 2008 Report Share Posted February 6, 2008 David says the parts were from an Arsenal Inc. gun someone had traded. They fit perfectly into my .223 Saiga and I've never had any problems with them. I've only put about 150 rounds through it since they were installed, but as of now, no problems. So theres your manufacturer. Arsenal Inc out of Las Vegas. Their website says that they don't sell parts though, only complete rifles. Quote Link to post Share on other sites
paprotective 362 Posted February 6, 2008 Report Share Posted February 6, 2008 Thank you for clarifying. Quote Link to post Share on other sites
devildog1122 0 Posted February 6, 2008 Report Share Posted February 6, 2008 None taking, I agreed that this should go back to picture posts. Here's my 7.62 and .223 20" barrel, USA K-Var Buttstock, FCG, PG, New Piston. I also have high cap mags from surefire and use original mags. My Saigas Quote Link to post Share on other sites
Motopilot1 37 Posted February 7, 2008 Report Share Posted February 7, 2008 already posted my saiga 223. post #153 Moto's busting chops because he KNOWs where to get SPARE PARTS, please spare 'me'. well i actually do not know where to get thoes parts that are US made i was honestly asking at that point. yes i did flip some shit about the legality of his gun but you know what i dont care if it is legal or not if he is happy with the rifle great more power too him to clarify nobody was bashing him i think its a great looking gun all saigas look great just wondering what parts he had thats all Quote Link to post Share on other sites
Superhawk138 202 Posted February 7, 2008 Report Share Posted February 7, 2008 None taking, I agreed that this should go back to picture posts. Here's my 7.62 and .223 20" barrel, USA K-Var Buttstock, FCG, PG, New Piston. I also have high cap mags from surefire and use original mags. My Saigas Nice dimpled 3rd Y-Stamp Devildog Quote Link to post Share on other sites
Srouxd 0 Posted February 7, 2008 Report Share Posted February 7, 2008 already posted my saiga 223. post #153 Moto's busting chops because he KNOWs where to get SPARE PARTS, please spare 'me'. well i actually do not know where to get thoes parts that are US made i was honestly asking at that point. yes i did flip some shit about the legality of his gun but you know what i dont care if it is legal or not if he is happy with the rifle great more power too him to clarify nobody was bashing him i think its a great looking gun all saigas look great just wondering what parts he had thats all Thanks for the compliment. yours looks fu@*ing sweet man! Quote Link to post Share on other sites
Srouxd 0 Posted February 7, 2008 Report Share Posted February 7, 2008 BTW, I've looked high and low and maybe I'm blind, but i can't find that AR mag adapter anywhere. Please enlighten me to it's origins, because AR mags are cheap as hell at the surplus place down here and one of those would be friggin sweet. Quote Link to post Share on other sites
Srouxd 0 Posted February 7, 2008 Report Share Posted February 7, 2008 None taking, I agreed that this should go back to picture posts. Here's my 7.62 and .223 20" barrel, USA K-Var Buttstock, FCG, PG, New Piston. I also have high cap mags from surefire and use original mags. My Saigas Did you vent those handguards yourself? they look amazing. Quote Link to post Share on other sites
Motopilot1 37 Posted February 7, 2008 Report Share Posted February 7, 2008 BTW, I've looked high and low and maybe I'm blind, but i can't find that AR mag adapter anywhere. Please enlighten me to it's origins, because AR mags are cheap as hell at the surplus place down here and one of those would be friggin sweet. http://forum.saiga-12.com/index.php?showto...galil&st=30 Quote Link to post Share on other sites
devildog1122 0 Posted February 7, 2008 Report Share Posted February 7, 2008 None taking, I agreed that this should go back to picture posts. Here's my 7.62 and .223 20" barrel, USA K-Var Buttstock, FCG, PG, New Piston. I also have high cap mags from surefire and use original mags. My Saigas Did you vent those handguards yourself? they look amazing. Yes, I did with a dremel. I tape the handguard and outline the way I want it and dremel it out. Quote Link to post Share on other sites
gunboy69 50 Posted February 12, 2008 Report Share Posted February 12, 2008 Posted this before ,but i finally got rid of the crapco stock Quote Link to post Share on other sites
Srouxd 0 Posted February 13, 2008 Report Share Posted February 13, 2008 Posted this before ,but i finally got rid of the crapco stock That it utterly BAD ASS!!! Quote Link to post Share on other sites
gunboy69 50 Posted February 13, 2008 Report Share Posted February 13, 2008 Thanks man, the forward optics are quick. I had a bunch of custom work done by Dinzag and Devin. Those guys are very talented. It was a lot of PMs and shipping back and forth. Quote Link to post Share on other sites
vjor 2 Posted February 24, 2008 Report Share Posted February 24, 2008 Well not much to show, just another .223 hey I am not a photographer. And if you look closely the front post is sticking out a little, the irons have to be zero just bore and well post a pic of it. Quote Link to post Share on other sites
gunboy69 50 Posted February 24, 2008 Report Share Posted February 24, 2008 Hey Vjor, I like it!! Is that the ultimak tube? Digital looks good too,nice job. Quote Link to post Share on other sites
vjor 2 Posted February 24, 2008 Report Share Posted February 24, 2008 Hey Vjor,I like it!! Is that the ultimak tube? Digital looks good too,nice job. Yes brother is a Vepr ultimak on there and thanks for the complement. Quote Link to post Share on other sites
Srouxd 0 Posted February 24, 2008 Report Share Posted February 24, 2008 Hey Vjor,I like it!! Is that the ultimak tube? Digital looks good too,nice job. Yes brother is a Vepr ultimak on there and thanks for the complement. Did you have to modify it or did that tube just fit right on there? Quote Link to post Share on other sites
vjor 2 Posted February 24, 2008 Report Share Posted February 24, 2008 Hey Vjor,I like it!! Is that the ultimak tube? Digital looks good too,nice job. Yes brother is a Vepr ultimak on there and thanks for the complement. Did you have to modify it or did that tube just fit right on there? The lugs on the Vepr ultimak are shorter than regular AK ultimak, the use of 2 steel plates that goes under the clamps of it was use, to align the gas tube with the GB and secure it to the barrel. The plates get secure to the barrel as you tight the ultimak to the barrel, zero movement. But this gun has a light barrel on, not the regular heavy barrel that must .223 come with. The gun overall is a little work horse made to withstand abuse and be there when you need it not a glass case gun just to be show. The idea of the ultimak was to install any red dot over the bore of the gun plus having the side plate let you install more optics or anything else on the time of need. Quote Link to post Share on other sites
Jroberts1968 32 Posted March 1, 2008 Report Share Posted March 1, 2008 This is my new 223 Saiga .223 Sig 556 ButStck Macko Forend Saw Grip G-2 Trigger Group Bugie Gas Tube Blgie HG Retaner Pro Mags Quote Link to post Share on other sites
vjor 2 Posted March 3, 2008 Report Share Posted March 3, 2008 This is my new 223 Saiga .223 Sig 556 ButStck Macko Forend Saw Grip G-2 Trigger Group Bugie Gas Tube Blgie HG Retaner Pro Mags I like it. Nice touch on the FSB. Quote Link to post Share on other sites
mollysman420 19 Posted April 10, 2008 Report Share Posted April 10, 2008 here is my S 223, G2 fcg,ati upper&lower, T6 stock. AK74 brake ati vert. grip Dinzag bullet guide Quote Link to post Share on other sites
mollysman420 19 Posted April 10, 2008 Report Share Posted April 10, 2008 here is my S 223, G2 fcg,ati upper&lower, T6 stock. AK74 brake ati vert. grip Dinzag bullet guide Quote Link to post Share on other sites
6500rpm 670 Posted April 15, 2008 Report Share Posted April 15, 2008 This is my little champ. I hate to say it, but I think it outshoots my Galil. Definately shoots soft with the least recoil I've ever had out of a .223 round. This one sports a Galil stock, AR mag adapter, Saiga Ergo grip, and Tantal Brake. Quote Link to post Share on other sites
IndyArms 10,186 Posted April 15, 2008 Report Share Posted April 15, 2008 Looks sweet!!! Quote Link to post Share on other sites
O.S.O.K. 0 Posted April 20, 2008 Report Share Posted April 20, 2008 OK, I'll add my two. I converted both of these myself - just basic pg conversions: .223 .308 And here's their grandpa: That's a type III with a firing line receiver - I had to add this to try and counter the very nice looking rifles that preceded my post Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.