shifty_85 20 Posted December 24, 2013 Report Share Posted December 24, 2013 i have always loved the look of the SVD dragunov stock. is there anyway at all to make it fit a Saiga-12? i know of anyone to ask it would be you guys Thanks!! http://centerfiresystems.com/stkdra-wood.aspx Quote Link to post Share on other sites
HighPlainsDrifter 466 Posted December 24, 2013 Report Share Posted December 24, 2013 (edited) Yes but you'd have to fabricate the retainers or get the originals from overseas. There is also a barrel "ring" that would need to be installed if you are going after original parts. I can post pics later if you need a visual. As for parts, I believe the handguard is a standard SVD/Tiger modified for the S-12. I'm assuming both retainers are specific to the S-12 but I can't confirm. I'd email ray at SaigaTechUSA and see if he has any retainers or possibly make you some. A few hours ago I just bought the last in stock factory SVD/Tiger handguard with Picatinny rails for my EXP 040-05. I can't wait to install. Edited December 24, 2013 by HighPlainsDrifter Quote Link to post Share on other sites
Matthew Hopkins 1,065 Posted December 24, 2013 Report Share Posted December 24, 2013 (edited) shifty, I am going to help you out on a SVD stock for the SAIGA, there is no need to modify a PSL or the very, very expensive real SVD stock. there is a US made SAIGA SVD stock already on the market, but I doubt anybody knows about it. so, check your PM. and have a MERRY X-MAS Edited December 24, 2013 by Matthew Hopkins Quote Link to post Share on other sites
cvasqu03 21 Posted December 25, 2013 Report Share Posted December 25, 2013 shifty, I am going to help you out on a SVD stock for the SAIGA, there is no need to modify a PSL or the very, very expensive real SVD stock. there is a US made SAIGA SVD stock already on the market, but I doubt anybody knows about it. so, check your PM. and have a MERRY X-MAS Oh come on man, you can't post something like that and then leave the rest of us hanging. 1 Quote Link to post Share on other sites
Matthew Hopkins 1,065 Posted December 26, 2013 Report Share Posted December 26, 2013 (edited) shifty, I am going to help you out on a SVD stock for the SAIGA, there is no need to modify a PSL or the very, very expensive real SVD stock. there is a US made SAIGA SVD stock already on the market, but I doubt anybody knows about it. so, check your PM. and have a MERRY X-MAS Oh come on man, you can't post something like that and then leave the rest of us hanging. non-link directions, is; go to weaponeer.net click on link that says "Weaponeer Products" left side of page, about half way down, "Saiga US Made Mahogany SVD Style Stock" Edited December 26, 2013 by Matthew Hopkins Quote Link to post Share on other sites
HighPlainsDrifter 466 Posted December 26, 2013 Report Share Posted December 26, 2013 (edited) Well here's the real deal. You buy the set and I'll purchase the forearm from you. No kidding! Dead Serious! I want that forearm! http://legionusainc.com/wood-buttstock-and-hand-guard-set.html Edited December 26, 2013 by HighPlainsDrifter Quote Link to post Share on other sites
shifty_85 20 Posted December 27, 2013 Author Report Share Posted December 27, 2013 shifty, I am going to help you out on a SVD stock for the SAIGA, there is no need to modify a PSL or the very, very expensive real SVD stock. there is a US made SAIGA SVD stock already on the market, but I doubt anybody knows about it. so, check your PM. and have a MERRY X-MAS Thanks. think i may have to pony up the cash and do that. ill post the same question i PMd you. would that stock work with a converted pistol griped saiga or would the stock be too long then?? Thanks all High plains if i had a need for the rest i would. that set looks awesome! 1 Quote Link to post Share on other sites
psl sniper 963 Posted January 7, 2014 Report Share Posted January 7, 2014 for unconverted saigas there is this option http://legionusainc.com/wood-svd-buttstock.html Quote Link to post Share on other sites
Goose 95 Posted August 19, 2014 Report Share Posted August 19, 2014 Hate to bring up an old thread, but it's been slow on the site the past few days and I'm bored. It's been several years now since I first heard about Tromix thinking about rifled S12 barrels and ever since then all I've been able to think about is an SVD clone. Scope, flash hider, bayonet and everything else. Totally impractical but it would be fun as shit to build. 1 Quote Link to post Share on other sites
Matthew Hopkins 1,065 Posted August 19, 2014 Report Share Posted August 19, 2014 (edited) I've been able to think about is an SVD clone. Scope, flash hider, bayonet and everything else. Totally impractical but it would be fun as shit to build. I don't know about "fun", but it would take a lot money and machinery, not to mention you would need detailed plans for every single part from the receiver all the way to the FH. there is no rifle out there that even comes close to a SVD where you can take parts off that or modify parts. Edited August 19, 2014 by Matthew Hopkins 2 Quote Link to post Share on other sites
Goose 95 Posted August 25, 2014 Report Share Posted August 25, 2014 Money and machines are the problem, but I love workin on my guns and tinkering with stuff like that. Quote Link to post Share on other sites
HighPlainsDrifter 466 Posted August 26, 2014 Report Share Posted August 26, 2014 (edited) Hate to bring up an old thread, but it's been slow on the site the past few days and I'm bored. It's been several years now since I first heard about Tromix thinking about rifled S12 barrels and ever since then all I've been able to think about is an SVD clone. Scope, flash hider, bayonet and everything else. Totally impractical but it would be fun as shit to build. Last I heard Tony will not be pursuing a rifled barrel for the S-12. He had a company produce a batch but he wasn't happy with the results. Edited August 26, 2014 by HighPlainsDrifter Quote Link to post Share on other sites
Goose 95 Posted August 29, 2014 Report Share Posted August 29, 2014 That's disappointing, but I'll make it happen someday Quote Link to post Share on other sites
psl sniper 963 Posted September 17, 2014 Report Share Posted September 17, 2014 I've been able to think about is an SVD clone. Scope, flash hider, bayonet and everything else. Totally impractical but it would be fun as shit to build. I don't know about "fun", but it would take a lot money and machinery, not to mention you would need detailed plans for every single part from the receiver all the way to the FH. there is no rifle out there that even comes close to a SVD where you can take parts off that or modify parts. very true i own and ndm 86 in 54r (chinese dragunov) and a saiga 12. you are talking alot of custom made parts. Quote Link to post Share on other sites
shifty_85 20 Posted February 23, 2016 Author Report Share Posted February 23, 2016 Well lets bring it back again id really love an SVD PSL style stock still and keep my pistol grip if i can the AK butt stock i have is way to short my face is way to close to the scope *Damn short commies* Sorry for the necro thread there really is not a WOOD S-12 SVD style stock. i still need to mill out the hand guards to fit or just pony up and buy them Quote Link to post Share on other sites
gunfun 3,931 Posted February 26, 2016 Report Share Posted February 26, 2016 Nothing wrong with reviving old threads with information that interests you. IMO that is far better than starting a new thread covering the same territory. Quote Link to post Share on other sites
shifty_85 20 Posted February 26, 2016 Author Report Share Posted February 26, 2016 yeah thats how i feel. its been a few since ive been on here. have a few extra bucks now a days and i really would love an SVD stock on my S-12 still cant find to many of them. Cant really even find SVD/PSL wood stocks either. was going to get one and just see what i might have to do. Quote Link to post Share on other sites
JDeko 792 Posted February 27, 2016 Report Share Posted February 27, 2016 SKS Man has SVD style stocks that fit converted Saiga receivers. 1 Quote Link to post Share on other sites
shifty_85 20 Posted February 27, 2016 Author Report Share Posted February 27, 2016 Went on there all i see are the plastic ones. i want nice wood. want to make my S-12 look like an SVD Quote Link to post Share on other sites
JDeko 792 Posted February 27, 2016 Report Share Posted February 27, 2016 Seems they must've sold out of them after a very long time. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.