Jump to content


Photo
- - - - -

Zastava PAP M85

Zastava PAP M85

  • Please log in to reply
54 replies to this topic

#31 tchick

tchick

    Advanced Member

  • Member
  • PipPip
  • 184 posts
  • Gender:Male

Posted 31 July 2014 - 10:19 PM

I've seen a thread adapter that steps the 26x1.5 L threads down to the 14L.

#32 Jon_L

Jon_L

    Member

  • Member
  • Pip
  • 96 posts
  • Gender:Male
  • Location:Crossville, TN

Posted 01 August 2014 - 07:58 AM

Cncwarrior.com is probably where you saw it.  I'm still trying to decide on the FH, but I may just go with a 74-style brake.



#33 dproctor15

dproctor15

    Member

  • Member
  • Pip
  • 14 posts

Posted 01 August 2014 - 02:35 PM

I have the 74 style and the 4 piece brake. I prefer the 4 piece flash hider on the m85. It does an excellent job of taming down the muzzle flash. The 74 style break is great on my m92 to reduce muzzle rise. They both work great for their function.
  • Jon_L likes this

#34 ctpunk

ctpunk

    Newbie

  • Contributor
  • 9 posts

Posted 11 August 2014 - 04:50 PM

These are pretty standard mods for this gun as Ive seen a few others like it (online) but I really love the look and feel of it. So f'n fun to shoot!

 

Midwest Industries railed forearm setup

Tango Down rail cover (left side)

SB47 Brace

Magpul AFG1

 

 

Attached File  ZastavaM85.jpg   144.29KB   0 downloads


Edited by ctpunk, 11 August 2014 - 07:10 PM.


#35 pomacanthus

pomacanthus

    Newbie

  • Member
  • 7 posts
  • Gender:Male
  • Location:south texas

Posted 19 August 2014 - 04:53 PM

AZG, and everyone else. Be carefull with the stocks you put on these. According to ATF (as i have been told by a firearms instructer) anything but the helper grips will change the guns classification from pistol to rifle.

If im wrong please correct me, just putting it out there.


Edited by pomacanthus, 19 August 2014 - 04:55 PM.


#36 AZ-DAVE-IZ109

AZ-DAVE-IZ109

    Executive Member

  • Contributor
  • PipPipPip
  • 859 posts
  • Gender:Male
  • Location:Arizona

Posted 19 August 2014 - 06:00 PM

If you are referring to a stock, then you are correct. It is illegal to add a stock without the proper nfa paperwork. It would then be classified as an SBR. If you are referring to the pistol arm brace, it is not a stock and not considered an SBR if attached to an ak pistol. Every sb47 brace comes with a copy of the ATF letter stating as such.
  • AZG and Gulo like this
Check out my YouTube channel!!
https://www.youtube....er/Chestercivic

#37 AZG

AZG

    Meat Popsicle

  • Contributor
  • PipPipPipPipPip
  • 2,967 posts
  • Gender:Male
  • Location:Mohave County, AZ

Posted 19 August 2014 - 06:19 PM

AZG, and everyone else. Be carefull with the stocks you put on these. According to ATF (as i have been told by a firearms instructer) anything but the helper grips will change the guns classification from pistol to rifle.
If im wrong please correct me, just putting it out there.

good looking out but I have a permanently attached fake suppressor on mine for a total barrel length of 16" making mine a perfectly legal NON-NFA rifle.

There is something you can teach your firearms instructor
Regards

LOCK UP YOUR GUNS!!!!!! KIDS WILL FIND THEM!!! :  https://www.youtube....HeXC7L85s?rel=0

b7d5b530-bc2b-470e-a931-c451a097b518_zps


#38 pomacanthus

pomacanthus

    Newbie

  • Member
  • 7 posts
  • Gender:Male
  • Location:south texas

Posted 19 August 2014 - 06:47 PM

Thank you for the clarifications/corrections. and i was referring to the pistol arm brace/helper grip


Edited by pomacanthus, 19 August 2014 - 06:55 PM.


#39 burntpowder

burntpowder

    Advanced Member

  • Contributor
  • PipPip
  • 139 posts
  • Gender:Male
  • Location:Pennsylvania

Posted 19 August 2014 - 09:10 PM

Ok guys help me out here.  I am seeing two versions of this firearm in your pics.......one that has the AR Magwell (I believe it is the new NP Model) and one that accepts regular M85 Mags (I believe it is the original/older PV Model).  Other than the magazines wells and the NP model coming with a Krinkov style muzzle brake, are there any other differences between the two?

 

Thanks.

 

-bp



#40 AZG

AZG

    Meat Popsicle

  • Contributor
  • PipPipPipPipPip
  • 2,967 posts
  • Gender:Male
  • Location:Mohave County, AZ

Posted 19 August 2014 - 09:15 PM

Ok guys help me out here. I am seeing two versions of this firearm in your pics.......one that has the AR Magwell (I believe it is the new NP Model) and one that accepts regular M85 Mags (I believe it is the original/older PV Model). Other than the magazines wells and the NP model coming with a Krinkov style muzzle brake, are there any other differences between the two?

Thanks.

-bp

You are correct.

Now that I think of it, older models might have serial number towards rear of receiver and no muzzle attachment where as the NP has s#towards front and comes with muzzle attachment.

Edited by AZG, 19 August 2014 - 09:20 PM.

LOCK UP YOUR GUNS!!!!!! KIDS WILL FIND THEM!!! :  https://www.youtube....HeXC7L85s?rel=0

b7d5b530-bc2b-470e-a931-c451a097b518_zps


#41 ctpunk

ctpunk

    Newbie

  • Contributor
  • 9 posts

Posted 20 August 2014 - 08:55 PM

moved...


Edited by ctpunk, 25 August 2014 - 09:57 AM.


#42 tchick

tchick

    Advanced Member

  • Member
  • PipPip
  • 184 posts
  • Gender:Male

Posted 23 August 2014 - 09:26 PM

Ok guys help me out here. I am seeing two versions of this firearm in your pics.......one that has the AR Magwell (I believe it is the new NP Model) and one that accepts regular M85 Mags (I believe it is the original/older PV Model). Other than the magazines wells and the NP model coming with a Krinkov style muzzle brake, are there any other differences between the two?
Thanks.
-bp

You are correct.
Now that I think of it, older models might have serial number towards rear of receiver and no muzzle attachment where as the NP has s#towards front and comes with muzzle attachment.

I think some of the earlier pistols also had the cap on the muzzle threads tack welded on. My "booster" muzzle device was not welded. I have a Manticore Arms night brake ordered. A rail for the top cover is next on the list. Then I'll try to decide on a red dot.

#43 tchick

tchick

    Advanced Member

  • Member
  • PipPip
  • 184 posts
  • Gender:Male

Posted 30 August 2014 - 07:11 PM

My Manticore Arms Night Brake came in this week so I took the M85 out today for the first time. We put just over 100 rounds through it. I had a cheap metal AR magazine that wouldn't work very good but the problem was the magazine and not the AK pistol. Once I got rid of that magazine the pistol ran great. The Manticore brake made a huge difference. I tried the pistol with the original booster muzzle attachment and then swapped it out for the night brake. The night brake made a big difference in felt recoil and muzzle rise. With it on there was no felt recoil and no muzzle rise. It was almost like shooting a .22. The pistol is loud and a fireball comes out the end of the barrel. With my eyes I have a hard time seeing the rear sight notch very well. I started out shooting low at 25 yards. Instead of adjusting the front sight to change the elevation I flipped the rear sight to the position with a 4 on it. That worked better. I intend on putting a red dot on this pistol so I did not waste any time trying to adjust the iron sights. Just to make things interesting we went back to 100 yards and I was consistently hitting a steel plate from that distance. Good enough for me. I am very satisfied with my purchase.

 

1996B256-E9A8-46C0-B8AA-7962FED7063E.jpg

 

E86D2EE0-7585-493A-A7F6-B61557A8A5CD.jpg

 

C80E814D-78A5-497D-AAB1-BE5DE8D52246_1.j



#44 tchick

tchick

    Advanced Member

  • Member
  • PipPip
  • 184 posts
  • Gender:Male

Posted 04 September 2014 - 07:17 PM

My Stormwerkz rail came in. I'm hoping to do the drilling this weekend to mount it.

C3D7BCF3-575A-455B-AA5F-5559A67CC6CE.jpg

#45 Bretonmaitre

Bretonmaitre

    Member

  • Member
  • Pip
  • 74 posts
  • Gender:Male
  • Location:Phoenix

Posted 05 September 2014 - 03:39 AM

Tchick, where did you get your rear sling mount?
  • HighPlainsDrifter likes this

Saiga 12 to Saiga 7.62 and Vepr 12


#46 mancat

mancat

    Top Member

  • Contributor
  • PipPipPipPipPip
  • 3,800 posts
  • Gender:Male
  • Location:Seattle

Posted 05 September 2014 - 10:45 PM

My Stormwerkz rail came in. I'm hoping to do the drilling this weekend to mount it.

C3D7BCF3-575A-455B-AA5F-5559A67CC6CE.jpg

 

 

small tip.. the Stormwerkz rail is solid enough that you can set it up for drilling by cranking it down hard with a set of zip ties through the rail slots. just make sure it's level on the dust cover before you start. a couple of my holes were off a tiny bit - fractions of a milimeter - and I had to work them a little bit with a round file. it doesn't take much.


Edited by mancat, 05 September 2014 - 10:48 PM.


#47 tchick

tchick

    Advanced Member

  • Member
  • PipPip
  • 184 posts
  • Gender:Male

Posted 05 September 2014 - 11:02 PM

Tchick, where did you get your rear sling mount?


The sling mount is Echo93. It works real good. It uses the same screw holes as the brace parts. It can be mounted on either side.

#48 tchick

tchick

    Advanced Member

  • Member
  • PipPip
  • 184 posts
  • Gender:Male

Posted 15 September 2014 - 11:34 PM

I ended up trying a Primary Arms red dot reflex sight. I was looking for something small, compact and affordable. Now I just need to get to a range and sight it in so I can see how I like it. I'm a Lefty and my light mount worked great when using the iron sights. With both eyes open using the red dot the light is kind of in the view of my Right eye. So now I may try another mount or get a Magpul mount for the Left side and just move it to the other side.

5085D059-0097-48A3-8B0F-5F2A52776390.jpg

8E5C375A-F0B9-4915-A1BB-2E02098A94A8.jpg

968EE230-A4D9-4BF2-A663-9151347BDF38.jpg
  • G O B likes this

#49 tchick

tchick

    Advanced Member

  • Member
  • PipPip
  • 184 posts
  • Gender:Male

Posted 16 September 2014 - 09:41 PM

7C7ADB91-29E1-4535-8E94-26DDD4488DE7.jpg

#50 tchick

tchick

    Advanced Member

  • Member
  • PipPip
  • 184 posts
  • Gender:Male

Posted 27 September 2014 - 08:37 PM

Today I went shooting and I took a variety of AR magazines with me to test to see if they would function OK in my M85. On my previous trip one of my metal magazines had a couple failure to feed malfunctions so I wanted to see if any of my other magazines would have any issues. I also took the same magazine that gave me the earlier malfunctions. The magazines I tested were:

Tapco 30 round polymer
CAA 30 round polymer
BCM 30 round metal
Surplus USGI 30 round metal (modified for use in an AR180)
C Products Defense 30 round metal
D&H Industries 30 round metal (the one that previously gave me problems)
Sterling 40 round metal
Magpul 20 round polymer

We put a little over 200 rounds through the gun and tested all the magazines and they all ran fine, including the one I previously had problems with. The magazine was brand new, never used so I'm not sure if it was the gun that needed some break-in or if the magazine needed to be broken in. Either way, it doesn't seem to be an issue now.

I don't own an AR15 so I don't have a huge stockpile of AR magazines. I purchased a Definitive Arms .223 AK when AR magazines were hard to get a couple years ago so I ended up with several different brands, getting some here and there as I could find them. I'm pleased they all work in the M85. After my first outing I thought it was going to be finicky with certain mags.

9876CF6E-32DF-492C-B7C7-0E87EEC3A816.jpg

Edited by tchick, 27 September 2014 - 08:39 PM.


#51 aubie515

aubie515

    Advanced Member

  • Contributor
  • PipPip
  • 102 posts
  • Location:PA

Posted 28 September 2014 - 07:09 PM

I'm not a fan of black since it glows under NV. I normally refinish my firearms with a thermal cured finish, but I was unable to remove the polymer AR15 mag adapter. I didn't want to risk melting the mag adapter, so I bought some Aervoe paint. It's much better than Krylon by a mile.

I'm still debating if I'm going to paint my T1 or just got a TD cover for the T1.

 

I liked the two colored camo, but added the green element since I live in PA.  I felt I needed the green for my AO.
Before
camping008_zps6892d515.jpg

During
camping012_zps568a6be4.jpg

Finished
camping013_zps6e5cdeaa.jpg

It's going to take some time to air cure since the brace is rubber and that makes the paint tacky.

My PAP M85NP has been my go to pistol since I am able to shoot it with stock folded or unfolded. I like the size and the fact that the pistol uses AR15 mags.

I've only shot the M85NP to 100 yards and I plan on taking it past 200 yards once the paint dries.


  • G O B and tchick like this

#52 tchick

tchick

    Advanced Member

  • Member
  • PipPip
  • 184 posts
  • Gender:Male

Posted 28 September 2014 - 07:47 PM

Very cool paint job!

#53 AZ-DAVE-IZ109

AZ-DAVE-IZ109

    Executive Member

  • Contributor
  • PipPipPip
  • 859 posts
  • Gender:Male
  • Location:Arizona

Posted 09 November 2014 - 11:12 AM

I love the handguard. What is the maker?
Check out my YouTube channel!!
https://www.youtube....er/Chestercivic

#54 tchick

tchick

    Advanced Member

  • Member
  • PipPip
  • 184 posts
  • Gender:Male

Posted 22 May 2015 - 11:42 PM

I changed the red dot and flash light mount since I last posted. I put the reflex red dot on a shotgun and put a PA advanced red dot on the M85. I also switched out the light mount to one that I can remove quickly. I moved the Magpul light mount over to a rifle.

Attached File  image.jpg   178.15KB   0 downloads

Edited by tchick, 22 May 2015 - 11:52 PM.


#55 Cat12

Cat12

    Newbie

  • Member
  • 8 posts

Posted 28 September 2015 - 10:40 PM

Here's me shooting mine I decided to opt out of the brace and muzzle, makes it more compact and it fits perfectly in my hazard 4 plan B sling pack.


FB_IMG_1428298143581_zpsbgsh4npa.jpg




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users