voonman 133 Posted August 8, 2014 Report Share Posted August 8, 2014 (edited) I just recieved my Brand new Mini Draco from Buds Gunshop and bought about $500 in extra parts plus an ATF Tax stamp for the Form 1 Paper work to get this little guy a new limb..Here is the mini draco project in progress.As always Chaos always makes an Awesome product..I was one of the first guys to buy one of your Chaos rails when you made them for the Saiga 12 and i will continue to buy there products...for this little guy I had to do a little modifications to the Chaos AK Titan Rear Rail gas lever for it work on the Mini Draco Gas Tube..After everything was dremeled down to fit.. the little lever that is used to remove the pin for the gas tube broke off while i was installing back on..no worries it still works but it will requre a bullet to turn the latch upwards..I wonder if cameron has this as a replacement part?Ill give him a call tomorrow and see if he does..below are the pics.. Edited August 8, 2014 by voonman 4 Quote Link to post Share on other sites
Bunker83 22 Posted August 8, 2014 Report Share Posted August 8, 2014 Damn that turned out pretty slick!!! When you get a new pin, it helps if you file a slight bevel around the edge, make sure you give it a good whack to flatten it back out after it's reinstalled Quote Link to post Share on other sites
voonman 133 Posted August 8, 2014 Author Report Share Posted August 8, 2014 Damn that turned out pretty slick!!! When you get a new pin, it helps if you file a slight bevel around the edge, make sure you give it a good whack to flatten it back out after it's reinstalled Thanx..i actually discovered that right after i re evaluated trimming it down.the beveled edge has to be filed down just a little bit..now i have to wait for the long part to make it a complete SBR Quote Link to post Share on other sites
poolingmyignorance 2,191 Posted August 9, 2014 Report Share Posted August 9, 2014 That looks great. Now you need a left side charging handle and a sweet ass trigger. Quote Link to post Share on other sites
voonman 133 Posted August 9, 2014 Author Report Share Posted August 9, 2014 thanx..the trigger isnt too bad..there is a tapco trigger inside..im looking at the lynch lef side charging handle..ill have to see if it will work with the chaos titan ak rail Quote Link to post Share on other sites
poolingmyignorance 2,191 Posted August 10, 2014 Report Share Posted August 10, 2014 Dude send it to tac47 and get the SRT trigger and left side charging handle..have them do a matt finish nickel plate on the bolt too. You'll have a wet dream of a Draco. Quote Link to post Share on other sites
cvhanh20 1,052 Posted August 11, 2014 Report Share Posted August 11, 2014 Sweet! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.