saltydecimator 482 Posted January 4, 2015 Report Share Posted January 4, 2015 stole the bolt out of it awhile ago. i have another bolt around, but chances are you have another s12 that can loan one to this, and in the process save ya some moolah... so this is complete gun minus -carrier -bolt -recoil assy -top cover i have done port work to it to get it to run low brass... not sure what size i went to (the size that cycled low brass!!!). i did the uf conversion. just went slow and measured twice! the lock up is good, little vertical axis play, but thats just inherent to the system. recoil is not unbearable, and if your Gina cant take it, they make some pads for them...and i actually have one. slip over, ya dig? heres some vids of it runnin: specs are: yugo grenade launching double reinforced stock virgin m92 rear trunnion tapco g2 trigger. polished. bakelite grip i could mod and install a UTG pro usa made quad rail if ya were interested.... in this pic, that spec of brown is where i drilled 2 #35ish holes so that you could remove the stock, for cleanig if you ever so desired. the cross pins dictate that you can install them, but removing them is impossible unless you have the receiver holes drilled i had the old holes welded up with TIG via a badazz muffler/tuner/auto guru.... thats what she looks like assembled. asking $850, obo i will trade for stuff: ya can pm in here, email me at my username at gmail.com etc... my short list in no particular order:Cz 527 76239veprBrowning 1911 22 pistolCz 82 in 32 autoSig 232/230 in 9x18Colt ARsBrowning buck marks Cz po9 threaded barrelak pistols 556saiga 223suppressor ready cz 22lryugo m85 ak pistols&w 986 or 929 9mm moon clip revolvers&w 460 xvrdpms g2/ remington r25 gen 2 1 Link to post Share on other sites
Recommended Posts