Fahi 2 Posted February 22, 2015 Report Share Posted February 22, 2015 (edited) Very nice ! Edited February 22, 2015 by Fahi Quote Link to post Share on other sites
ChileRelleno 7,071 Posted December 20, 2015 Report Share Posted December 20, 2015 (edited) This is pretty much what I settled on for final fit. I made an insert to fill the gap between the pistol grip and receiver. Everything seems to be rock solid, shot 60 rounds today and nothing moved. 100 yards Sunny/clear 67' NE wind 8-10mph Tula, steel cased 150gr FMJ 20rds Top center is cold bore flyer, first one I've seen that far off. The rest were shot rapid fire, just as fast as I could reacquire and pull the trigger. *The pasters are covering my first two rounds of shots with my M1A. Edited December 20, 2015 by ChileRelleno 1 Quote Link to post Share on other sites
G O B 3,516 Posted December 29, 2015 Report Share Posted December 29, 2015 BEAUTIFUL!!! I do have 2 minor suggestions, I would put the thumb screws on the right side of the stock, and to repair the fit of the stock to the receiver, I would use epoxy colored black to extend the front of the stock, and then fit it to the receiver. BUT what you have there is BEAUTIFUL! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.