Behindthepine 0 Posted December 24, 2015 Report Share Posted December 24, 2015 I can not find a firing pin for this gun can someone point me in the right direction or does anyone have a spare they want to sell me. Really would like to shoot this gun. Quote Link to post Share on other sites
Behindthepine 0 Posted December 24, 2015 Author Report Share Posted December 24, 2015 Actually I don't know if what I need is called the striker or the firing pin. Quote Link to post Share on other sites
Sim_Player 1,939 Posted December 25, 2015 Report Share Posted December 25, 2015 (edited) Do you have the pieces? If you have the specs. but, can't find one, you could have one made. Maybe find someone nice enough to take measurements and pictures of theirs. Edited December 25, 2015 by Sim_Player Quote Link to post Share on other sites
G O B 3,516 Posted December 25, 2015 Report Share Posted December 25, 2015 Pics or we have no idea what you need, there are at least 2 different firing pins used on various S-.410's. Quote Link to post Share on other sites
Goose 95 Posted December 30, 2015 Report Share Posted December 30, 2015 Look for a near-by machine shop, doesn't necessarily have to be a gunsmithing operation, and just have them turn one down for you. There's nothing too elaborate about it's shape, but they will need dimensions, so see if you can find someone that can take some measurements from theirs. I'm actually about half way across the country from mine until after the new year, otherwise I'd do it for ya, sorry bud. And good luck Quote Link to post Share on other sites
G O B 3,516 Posted December 31, 2015 Report Share Posted December 31, 2015 Before going too far, try a standard AK 74 firing pin. Just make sure the firing pin projection is right. Quote Link to post Share on other sites
Behindthepine 0 Posted January 5, 2016 Author Report Share Posted January 5, 2016 http://m.imgur.com/a/B3urx I've been to one gun smith who only told me to look online but can't even find a clear picture of what it is supposed to look like. Anyone that has this if you could take measurements or take a pic so I know what it looks like. I have a standard ak 47 firing pin but it does not fit Quote Link to post Share on other sites
Sim_Player 1,939 Posted January 5, 2016 Report Share Posted January 5, 2016 You could make one using a drill-bit, dremel, and a drill. Quote Link to post Share on other sites
G O B 3,516 Posted January 6, 2016 Report Share Posted January 6, 2016 Do not use a drill bit!!!! If you need to make one, use a nail, one made to use in a nail gun. That will have the right metallurgy. A drill bit is too hard and can shatter. But a standard AK-100 series pin may work. The one piece may work where a two or three piece one was originally used. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.