boomka 40 Posted May 11, 2016 Report Share Posted May 11, 2016 I can't seem to hit much of anything even at fairly close range ( fifty feet ). Birds as small as cowbirds escape repeatedly ( I have never killed one even after five or six occasions ) even though they are clearly within the pattern ( I got a dove that was feeding with the cowbirds ). So is anyone making a choke that could screw into the RWC brake after cutting threads inside? I'm thinking a mod or full choke would be about what I need. Quote Link to post Share on other sites
YOT 3,743 Posted May 11, 2016 Report Share Posted May 11, 2016 I get very good results with a poly-choke. YMMV Quote Link to post Share on other sites
gunfun 3,931 Posted May 11, 2016 Report Share Posted May 11, 2016 Cobra and DPH sell Winchoke adapters. I would recommend those, and like mine. 1 Quote Link to post Share on other sites
boomka 40 Posted May 12, 2016 Author Report Share Posted May 12, 2016 Spent a while at the LGS today measuring winchokes and such and all of them are too small to engage the ID of the RWC brake :-( Cobra and DPH sell Winchoke adapters. I would recommend those, and like mine. Was looking at it and was wondering if the DPH is spin-on or weld-on? I don't have threads under the RWC brake and I don't know who I would send it off to who would know how to properly treat a Saiga barrel and not just say "it's a shotgun, how perfect does it have to be", I don't want the long range accuracy of slugs to suffer. Quote Link to post Share on other sites
gunfun 3,931 Posted May 12, 2016 Report Share Posted May 12, 2016 screw on. It looks like a flash hider. Sounds like what you should do is get your brake reamed through and have the barrel cut and reamed for Remchoke or Winchoke. I know Evl offers this service, and if there is clearance I would choose remchoke of the two. 1 Quote Link to post Share on other sites
boomka 40 Posted May 12, 2016 Author Report Share Posted May 12, 2016 screw on. It looks like a flash hider. Sounds like what you should do is get your brake reamed through and have the barrel cut and reamed for Remchoke or Winchoke. I know Evl offers this service, and if there is clearance I would choose remchoke of the two. Hadn't thought of that, the brake is already large enough for the choke to drop into, I would just need him to install the choke ( cutting and tapping ) and get a long wrench. Do you have contact info or a website of this Evl fella? 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.