ec4321 113 Posted March 29, 2017 Report Share Posted March 29, 2017 Going to be building out another Vepr12. I used the Rifle Dynamics AK AR Stock adapter in the past... But I am thinking, will this rear trunnion work on the Vepr-12? https://mdcmfg.com/collections/ak-platform-products/products/ak-bta Quote Link to post Share on other sites
VforVandetta 42 Posted March 29, 2017 Report Share Posted March 29, 2017 Which model do you have? fixed tubular stock? Thumbhole stock? Folder? Unicorn 1st run Vepr 12 with fixed cheap wood stock and AK tang? -V 1 Quote Link to post Share on other sites
ec4321 113 Posted March 29, 2017 Author Report Share Posted March 29, 2017 Well I have a folder as well, but... What I am referring to is a vepr 12 i have with fixed cheap wood stock and AK Tang. Those are unicorns? I have two of em in that configuration. Quote Link to post Share on other sites
VforVandetta 42 Posted March 29, 2017 Report Share Posted March 29, 2017 Yea dude. They are. That first run of Vepr 12s is known for all around high quality, and they are prized because of their ease of stock conversion. They fetch some decent coin on gun broker $1000-$1100. The adapter you linked will work, but You're doing a full trunnion swap at that point. I think a Rifle Dynamics adapter would work beautifully for you. -V 1 Quote Link to post Share on other sites
evlblkwpnz 3,418 Posted March 29, 2017 Report Share Posted March 29, 2017 Plan on using an optic and plan to modify the trunnion in a few ways and areas. It will not be a simple remove the old and rivet the new situation. 1 Quote Link to post Share on other sites
ec4321 113 Posted March 29, 2017 Author Report Share Posted March 29, 2017 Plan on using an optic and plan to modify the trunnion in a few ways and areas. It will not be a simple remove the old and rivet the new situation. Would you recommend using that trunnion or using the Rifle Dynamics AK / AR adapter if it was your firearm? https://rifledynamics.com/products/ak-to-m-4-stock-adapter-by-rifle-dynamics Quote Link to post Share on other sites
mike12345 18 Posted December 1, 2018 Report Share Posted December 1, 2018 (edited) https://www.carolinashooterssupply.com/Vepr_Internal_block_stock_ACE_DPH_Tromix_Raptor_p/css-v12-stk-block.htm https://www.carolinashooterssupply.com/ACE_CAR_15_STOCK_Pignose_ADAPTER_SAIGA_AK47_p/css-pignose.htm https://www.carolinashooterssupply.com/Tubular_Fixed_Stock_VEPR_12_Receiver_Adapter_VPR_1_p/css-v12-stk-block-2.htm of course the tube stock you don’t have the tang to cut off. I believe I went and I found a longer pistol grip screw for that reciever block, run to the hardware store. Edited December 1, 2018 by mike12345 Quote Link to post Share on other sites
saltydecimator 482 Posted January 14, 2019 Report Share Posted January 14, 2019 also, the top long rivet will probably match up, but the LH, lower rivet wont. on the fixed tube style.... the trunion is for a folder trunnion, so the rivet pattern is offset, not symmetric like the MDC trunnion.. Quote Link to post Share on other sites
evlblkwpnz 3,418 Posted January 15, 2019 Report Share Posted January 15, 2019 I'd just put a Magpul MOE AK stock or Zhukov on it and call it a day. Minimal effort, minimum expense, and maximum result. Those stocks are quite comfortable, lightweight, and nice looking. If looking for some LOP adjustment, the Zhukov offers it. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.