Help - Search - Members - Calendar
Full Version: Some sighting questions, help needed!
forum.Saiga-12.com > Saiga & other AK based Rifles > Saiga 7.62 X 39
JDNJ1985
Hey guys,

So I've been out twice with the converted Saiga. I think I've done well considering I wasn't a shooter previously. I do think that my groups are a bit low. I know that I will probably have to adjust my front post a bit.

Here is the target:




Next, on the rear sight...The numbers 1,2,3 represent meters by the hundreds...correct? Do they represent the distance UP TO that number? Meaning, setting the target on one would be accurate up to 100 yards? Or do they assume that you are shooting at a distance of 100 yards off the bat?

I ask, because I shoot at 50 yards when at the range and keep my rear target on setting 1. Should I move it back at all?

Lastly, this will sound very noobish. When using the iron sights, the target is to stay on top of the post when lined up...like this:



Correct?? Instead of covering the target with the post, the target sits on top of it...right?

Sorry for such newb-esque questions...but I came into this scene with very little shooting experience.

Thanks guys.

-Joe
Ak addict
Looking at your target, and the way you're aiming I'd say you're hitting right where you're aiming. I personally cover what I'm aiming at with the front sight.
saigatyler
you are using a 6 o'clock hold. and it is recomended because you never loose sight of your target. if you are used to holding with your target sitting ontop of your front sight, by all means, keep it up.
JDNJ1985
Thanks for the replies guys.

So there is no "set in stone" rule for where the target should sit?

I aimed for the center many times, and only hit it a couple as you can see.

How do you guys usually aim?

Do I need to change the rear site at all?

thanks

-Joe
Ak addict
Go with what works for you! I personally leave my rear sight on the 1, and adjust the front sight post for 100 yards.
JDNJ1985
Yeah, I was placing the target on "top" of the post for most of those 6:00 shots. I suppose if I adjust the front sight a bit, then I will shoot higher.

-Joe
lonerider
It that target was an Insurgent you would have killed him. It doesn't matter if you got him in the heart or stomach, he would have been dead!!!
JDNJ1985
Haha, hope so!

Also, how do you guys stay stable when standing? I find that the muzzle drifts a bit. Trying to control this.

-Joe
steve
Do you have a sling? I put my left elbow through the sling and grip the forend with my left hand when Im shooting from a standing position you may have to adjust the sling a little. I find that the added tension helps stabilize my hold on the target.
JDNJ1985
QUOTE (steve @ Nov 26 2008, 06:51 PM) *
Do you have a sling? I put my left elbow through the sling and grip the forend with my left hand when Im shooting from a standing position you may have to adjust the sling a little. I find that the added tension helps stabilize my hold on the target.


Thanks for the info man. Yes, I have a Bulgarian sling. It does seem a bit short though, since I have a NATO buttstock. I'll give it another go today.

Cheers

-Joe
SHOOTERBOY
QUOTE (JDNJ1985 @ Nov 27 2008, 08:04 AM) *
QUOTE (steve @ Nov 26 2008, 06:51 PM) *
Do you have a sling? I put my left elbow through the sling and grip the forend with my left hand when Im shooting from a standing position you may have to adjust the sling a little. I find that the added tension helps stabilize my hold on the target.


Thanks for the info man. Yes, I have a Bulgarian sling. It does seem a bit short though, since I have a NATO buttstock. I'll give it another go today.

Cheers

-Joe



If you're trying to sight in the rifle it is best to have it solidly resting on sand bags so the strike points are due to the aimpoint/sight/gun rather than your wiggling. Then, you can adjust for the variances by dialing in the weapon.
762x39R


I ask, because I shoot at 50 yards when at the range and keep my rear target on setting 1. Should I move it back at all?


Also, if your sights are set on 100 yd you will hit a little bit low at 50.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2009 Invision Power Services, Inc.