-
Content Count
81 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Store
Posts posted by gunguy51
-
-
-
thanks cobra i'm the guy that him that $200.00 was a good price and he said that that was to much.
-
numlock the pins you are talking aren't on the 308 rifle just disreguard that step the pins that you can see that go through the reciver for hammer and triggerare there you need to get a retainer plate to hold the hammer and the trigger pins inplaceon the converison. hope this helps gunguy51I've found a Saiga 308 16" in a local gun store for a good price and the only thing stopping me from getting it is several questions about converting it.The guide here at http://www.cross-conn.com/Saiga_Conversion/Step_1.htm has been helpful but from the picture thread and what I saw at the gun store the saiga 308 seems to be somewhat different than the .223 and 7.62x39 versions.
Specifically in Step two of that guide he drills out two pins right above the trigger, but in the picture thread I only see one pin above the trigger of the 308 and I can't recall having seen more than one on the rifle I looked at. Does this pin exist on the 308 Saiga, and where can I get real replacement pins for these pin(s)?
In step 7 he rewound the disconnecter spring around one of these new pins, if I got a real pin I wouldn't have to do this correct?
Finally, do the Saiga 308's have the pistol grip nut hole already cut?
For parts I figure :
G2 Fire Control group from Tapco
Butt Stock and Grip from K-Var
Replacement pins (for any I drill out)
Grip Screw and nut
Am I missing anything?
-
shadows the stock you want to use wouldn't work with the tapco trigger to use the tapco trigger you would have to do a converison. i would suggest the redstar trigger it's fully adjustable. you might use a choate dragnov stock recoil buffer and a muzzlebrake as these will reduce recoil too about in half. the scope should be alright. to show what this would look like check out sagianov inthe search box under sagianov and look for my sagianov gunguy51
-
wolf gold is realgood ammo shoots the sameas s/a ammo and the group size was almost half the size group as the s/a in 308 sagianov. gunguy51Which Cabelas are you speaking of? -
are these galil mags you're talking about mine fit tight front to back but some movement side to side to get rit of this when you sand or file the front of the mag file a little and then try to fit then in the mag well till they lockin tight a little movement is alright.
gunguy51
-
hey all florida sagia forum just wanted too know how many sagia menbers we had in florida maybe we can get together for a all sagia shoot sometime or if close enough to help each other if we have problems with converisons or just get together to shoot the breeze i'm in brooksville fl.
gunguy51
-
here's a picture of my 308 with belirus low mount and 54mm scope.Got the picture on the POSP, but I'm a little wary of shooting a 308 with my head stuffed into an eyecup. How does one avoid getting a shiner with those things? Some of these scopes seem like a good deal, but they are very different, especially the left hand offset models.Alternately, what's a recommended scope mount?
The eye cups are soft rubber and will easily give with recoil, and they are long enough that you won't get a shiner.
-
anybody have a front site post laying around that they aren't using need for new idea for front site ? let me know by pm or email thanks gunguy51
-
not having enough sagia's to do converions tooo!
-
sounds great i'llbring my 223 sagia and waste some ammo.
gunguy 51
-
maybe you can come up north of st.pete here in herando county got anice range about 5 min from house and do some shooting .Thanks for the feedback!great looking gun you did nice job on it what brake is that on there is that one of dinzag's brakes ?gunguy51
Yes, dinzag supplied me with his slip-on 74-style brake. It was simple and straightfoward to attach. I'm just itching to try it out!
gunguy51
-
-
great looking gun you did nice job on it what brake is that on there is that one of dinzag's brakes ?
gunguy51
-
it's 6.25 inches. gunguy51
-
get a tapco or one from midwest armorys it should be around 6.50 inches i'm pretty sure.
gunguy51
-
chris this is what you need gas piston fire control [ trigger disconector hammer] stock hand guard gailil mags dinzag's bullet guide fire control retainer platefor refinishing dulicolor satin black engine paint matches sagia's finishasorted hand tools dermel tool center punch and asorted drift punches if i left any thing out someone else will chime in. gunguy51Guys,I've been scrubbing the site looking for an actual list of pieces that are needed for the .223 conversion. Yes, I finally got the hammer pin off It came off so easily. I feel like a maroon. Anyway, if anyone has a list of parts i.e trigger, hammer, etc.
Thanks In Advance,
Chris
-
it's in 7.62x39 forum at the top of the page.
gunguy51
-
the prvi is the same as wolf gold made in chech . very high quality brass case copper jacket as good as our m193 if that helps.
gunguy51
-
-
my sagia 223 gun certifcate is 88mm .
gunguy51
-
brand new stock saiga butt stock for sale $ 20.00 plus shipping also regular fcg for stock saiga #15.00 plus shipping thanks for looking gunguy51
-
anybody have a die and a tat that i can rent to thread tomy barrel needs to be for 223 saiga.
thanks gunguy51
-
For me that's more than half the fun! Good luck and post some sweet pics!
thanks corbra 76 two now i need to find somebodt that has a die and tat for theading for a 223 barrel gunguy51
223 gas piston swap
in Saiga .223
Posted
can someone tell me how to change the gas piston out on my 223 gun looks like no pin just dimpled in thanks gunguy51