[ADDED several new products to our website]

Site looks great. Just ordered my mag combo yesterday.... I was about to ask if you all were looking into making a breacher before I seen the site.... Everything looks great.... Thanks

[I'm goin for it - cutting off the stock for dummies]

Thanks for the stats Matt.... I will most likely make the jump despite the fear of crcking it.

[BAD Lever on MKA 1919]

Do a search....... There are some posts about modifying the BAD lever on here. A couple bends and most people get it to work fine.`

[Factory 10rd Mag problems]

No Worries duggr. Thanks.

[I'm goin for it - cutting off the stock for dummies]

I was really interested in putting the magpie UBR stock on until I seen reports of lowers cracking..... No one wants to spill the beans on which adapter it's mostly happening with either........ I understand the adapter is not the root cause and in most cases it's due to inconsistencies, but come on....

[Best AR buttstocks for modded MKA?]

Montana3gunner,

 

Did you try the UBR? Just wondering because I, like yourself do not feel like most adjustable stock would last. This thing really does seem solid.

[Best AR buttstocks for modded MKA?]

I'm looking into Magpul UBR...... Check it out..... Thing is really rugged, little heavy but rugged.

[Factory 10rd Mag problems]

No worries, appreciate it.

 

Hope all turns out OK on the homefront.....

[Factory 10rd Mag problems]

Duggr,

Was wondering if I could get the width and thickness of the salem 6 extensions? I'm thinking about trying to make my own couplers

[922r. vs factory 10rnd w/coupler]

Appreciate your insight.......

 

Not trying to give anyone any reason to try and take my weapon.... Especially nowadays.

[922r. vs factory 10rnd w/coupler]

Anybody making mag followers??

[922r. vs factory 10rnd w/coupler]

That's what I would think too, there is no way to use it all at the same time..... so I would think each mag parts would count seperately.

 

What are your thoughts about the mag extensions that use factory(imported) 5 rounders with a US made extension?

[922r. vs factory 10rnd w/coupler]

Exactly... Thanks.

[922r. vs factory 10rnd w/coupler]

Right..... I didn't know if "factory" 10rounders were considered foreign and if I added 5 US parts and brought the number of foreign down to 9, would I then bring the foreign count back up by 4 if I added two factory 10 rounders on that were coupled......

 

Right..... I didn't know if "factory" 10rounders were considered foreign and if I added 5 US parts and brought the number of foreign down to 9, would I then bring the foreign count back up by 4 if I added two factory 10 rounders on that were coupled......

[922r. vs factory 10rnd w/coupler]

This may be a dumb question but would rather ask then set myself up for failure.....

 

If I were to couple 2 Factory 10 rounders would it then double the "imported parts" seeing how 2 magazine bodies and followers are technically on the gun? Or does it still count as 2 impoted part since only 1 mag is technically installed at a time?

 

Also, mag extensions that use the factory 5 rounder....... Im guessing this body is still considered "imported" since the whole body is not US made......

 

 

Digging too deep into it???

[The wait is over , here are some pics of the new mag coupler]

Will these Mag couplers work with Firebird/salem 6 mag extensions as well as T&N??

 

NVM.... just seen they r for factory 10 rounders. Thx

[MKA 1919 Shark Brake]

Anyone know where I can find one?

[New Stock Available]

<blockquote class='ipsBlockquote'data-author="D0KH0L1D43" data-cid="737051" data-time="1330026859"><p>

Damn, I already ordered my Tromix stock back in January. Haven't put it on yet but I do really like the look of your new one here! What a predicament I have here....</p></blockquote>

 

 

Aluminum Skeleton?

[Tromix Skeleton Stock in stock?!?!]

Any insight on aluminum vs. Polymer?? I really want the Aluminum but the only one I see is on CSS and it is Polymer.....

 

I truly believe this is the best looking skeleton stock ever. Should I just jump on the Polymer or keep searching?

 

Thanks

[Can't find xn model for sale. Who has them?]

I'd jump at Centerfire....... If it will let you purchase. Sometimes it says Backorder not available.....

 

I don't know if I did it at the right time or not but when I ordered mine in the begining of March, it said it was backordered.

 

I received mine March 22nd and the website said backordered the whole time, and still does.

[MKA 922r Products]

Gunsumer reports has an excellent review that really breaks down the 922r parts

[I'm goin for it - cutting off the stock for dummies]

Has anyone tried using a fine tooth bandsaw? I have a miter saw but I am weary of using it for this.......

[Tooth and Nail Drive block]

OK. Thanks. I am a newb so I really don't know. I seen a warning for the handguards and I started shying away from those mods due to the fact I wanted the flexablilty. I most likely will stick to light loads anyways....

[My MKA]

For those with T&N or FB handguards, How hard is it to remove or disassemble for cleaning? Do you get that deep into it while cleaning? I've seen most people don't disassemble much for cleaning... Just trying to get your perspective..

 

New to the shotgun world and just received my MKA. Haven't had the chance to shoot it yet, but would like to before I do any mods.

 

Really glad this forum is around. Alot of smart people with great tips and enormous amount of support.

 

Thanks.

 

Joe

[Tooth and Nail Drive block]

Is this drive block compatible with heavy loads? Just wondering, most of the might to help with cycling light loads have warnings about using heavy loads with those parts installed.

 

*mods, not might.....