captaincall 0 Posted April 10, 2013 Report Share Posted April 10, 2013 i purchased some 410 snap caps yesterday and fed them through my iz104 a few times. they look gnarled. chips taken off both ends and some near the center. is that normal? i've had issues since converting my shotgun, but the parts involved there weren't modified. it's odd. Quote Link to post Share on other sites
captaincall 0 Posted April 10, 2013 Author Report Share Posted April 10, 2013 (edited) might be able to see it in these pics. btw, out of all of my weapons, this is my favorite. and it's annoying that it is so touchy. for instance. when i first converted it and went to fire it. the hammer i got with the conversion kit from carolina shooters supply was rubbing against the side of the receiver. so hardly any rounds were firing. there is a notch on the side of the original hammer to account for this, but the tapco one doesn't have that. Edited April 10, 2013 by captaincall Quote Link to post Share on other sites
dubya 198 Posted April 11, 2013 Report Share Posted April 11, 2013 You have to do a little work yourself to get these to run right. Make the notch in the hammer with a dremel or grinder and try to get the G2 hammer similar to the factory one. Quote Link to post Share on other sites
liberty -r- death 1,445 Posted April 11, 2013 Report Share Posted April 11, 2013 Most of my fire shells are gouged in variuos places. Bad enough I do not reload them. Not sure on the trigger issue. Sorry. Quote Link to post Share on other sites
Raybitcant 0 Posted December 19, 2021 Report Share Posted December 19, 2021 My Saiga is doing the same thing. Any mag OEM or SGM, round snags the top of the breech. I would post pic's but, not sure why they don't upload. Did you ever figure how to fix? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.