RS12
-
Content Count
59 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Store
Posts posted by RS12
-
-
I have an MPA930t 9mm mini MAC style pistol for sale or trade. It's the top cocking version, threaded barrel, it comes with 2 32rd polymer mags. It's old, beat up, I'm the 2nd owner and I've put about 500rds through it. It works mostly fine, with the occasional double feed when bump firing. I believe the sear is wearing out and will need to be replaced as it occasionally goes burst for 3-5 rounds when pulling the trigger too rapidly. Like I said the gun is a beater and is sold as is. I value it at $250 trade or cash, FTF only. I can send pics upon request.
For trades I am looking for weight equipment, such as olympic weight benches and plates, dumbbell sets of all sizes between 50-100 lbs, prowler sleds, medicine balls, etc... I'm open to a variety of exercise related equipment. I will pay 50 cents/lb for most used weights, and up to 60 cents/lb depending on what you've got. I'm willing to haggle a bit but don't be ridiculous, if you only want to spend $175 go buy a Hi-point. I'm in SE Michigan, near Chelsea, and I will drive a reasonable distance for a good deal. I also have a Chaos Porkypine for sale or trade see my ad if interested. Thanks--Ryan
-
I have a Chaos Porkypine I would like to sell or trade. It's the original version, I bought it in 2011, put it in my safe and forgot about it until today. It's in excellent condition with a small wear mark in the finish at the tip, all prongs are straight and it functions fine. I can provide pics on request. I value this at $325. I will take cash or trade for weight equipment. I'm looking for an olympic weight bench, olympic weight plates, dumbbell sets of all sizes between 50-100 lbs, prowler sleds, medicine balls, etc... I'm open to most exercise related trades. I will pay 50 cents per pound for most used weights up to 60 cents/lb depending on what you've got.
I'm located in SE Michigan, near Chelsea, and I will drive a reasonable distance for a good deal. I'm willing to haggle a bit but don't low ball me, I will not respond favorably. I also have an MPA 930t 9mm mini MAC for sale or trade. See my ad in the pistols section if you are interested in both. Thanks--Ryan
-
I'll take the 2nd set for $70.
-
Good thing Dorner didn't have any accomplices. Those police put themselves in a position to be ambushed and rolled up. My platoon Sergeant would have ripped me a new asshole if my platoon acted like they did. It's the same in most police videos I've seen.The cops are so focused on their objective that they fail to pull security on their rear and flanks, they bunch up and cluster. I think it has to do with their belief that no one would attack them other than the one they are looking for. Perhaps that is true so long as they deal with lone wolves but sooner or later someone is going to organize and then they are going to lose a lot of cops. If you are going to dress like a soldier and carry a soldier's weapons you had better learn how to fight like a soldier too because some day someone is going to take you up on your offer. Just my opinion.
-
7
-
-
Man, that bullpup looks great. I like the color you chose for it but how much does it weigh? And how is the weight distributed? I had a Kel-Tec RFB that was somewhat heavy compared to an AK or AR but all the weight was in the stock and when you shouldered it the balance was excellent and I could switch between targets very rapidly without my forward arm getting tired. How does this rate?
-
You are correct, it most DEFINITELY is NOT the same as the autoplug.
How about a gentleman's challenge?
Let's report back after our range outings with proper info, what type of ammo, brand, number of rounds, etc... and let's see how many shots we can go without cleaning the gas block. I've already ran 250 rounds of Federal 7 1/2 birdshot bulk pack from Wally World. I've also ran 50 rounds of Win Uni 7 1/2 birdshot. So we can go from there. I only removed the autoplug and dumped debris out of the gas block.
How 'bout it? Wanna really see what it can do?
Oh, and add ten remington sluggers to that number as well, 2.75"
Okay, but I'm not to that round count yet though. I'm running the cheaoest walmart ammo I can find to test with anyway. As long as we are doing a gentleman's challenge, lets kick it up a notch and do a real world test on video. My parents have an old farm pond with a nasty mud, silt, clay bottom. I'll take my gun and throw it in the pond and drag it back in that nasty pond crud and shoot it. Are you game for doing something like that with your weapon on video? Let me know, I'm going to my parents house next weekend.
I'd like to see that.
-
Thanks for the info. I'm interested at least and I don't go to every gun site on the internet so I haven't seen this before. Don't listen to the whiners, some of these guys just need to pull their panties out of their twat and rinse the sand out.
-
1
-
-
I really like that last one. I could start so many fights wearing that shirt here in Ann Arbor.
-
I'll take a 3 pack of the Surefire mags.
-
If you don't already have one get a Kel-Tec RFB. My current favorite. I've always wanted a bullpup .308 and I know others out there have the same desire. It's the same desire that made me buy 2 Saiga 12s'. Magazine fed 12 gauge = awesome. Bullpup .308 that takes FAL mags also = awesome, especially if you already own a FAL, as I do. The RFB is 27" from tip of muzzle brake to end of buttstock. Did I mention it's .308? He he he. Too bad ammo costs so damn much. That is one of two drawbacks, as I see it, the other being that it does not come with any sights. I understand it was made for optics but I like a set of iron sights on all my rifles. Optics break, irons no so much. Anyway, that's my 2 cents. Consider adding it your list.
-
I have the same stock on one of my S12's also. Wrap it in paracord and hold it tighter into your shouder. That should be enough. If it's not buy a cheek pad or a new stock. I like my Tromix stock with Limbsaver the best and recommend it even without the Limbsaver. The bottom line is that if you can't comfortably shoot your weapon you need to make some changes while you don't need it to defend your life. Once you are defending your life it is too late to make any changes.
-
I didn't make it to the pumpkin shoot last year but I am coming this year. If you schedule a summer shoot I'll come and bring some gun fun. I don't have any full auto but I'll bring my S-12's and my Kel-Tec RFB.
-
That's an interesting gun. It looks like they have a finger adjustable gas knob on these models. There's only one pic where you can see down the front of the gas knob and it appears to have a screw or something that you can adjust like the spring loaded one on the autoplug. I notice the 12E version has the sight built right into the gas block and it does not appear to have an adjustable gas knob. I assume this is because the race gun will likely be used with more types of ammo. I would like to own one of these but most likely never will as I don't believe we can import them for civilian sales. Cool gun though.
-
Interesting. You obviously have handled them, how do they feel? More importantly how do they shoot? I always like personal testimonial from someone introducing a new product.
-
I'm in for 1 but not until the price drops to around $400. I already have 2 S12's so I'm not in a hurry but they do seem pretty cool. I have a Kel-Tec RFB and if the KSG is anything like it I'm going to love it. Plus it is the shortest shotgun I can own in Michigan without it being an AOW. We are not allowed to have SBS or SBR in Michigan as, apparently, our noble leaders are afraid that Laronte will conceal two SBS under his FUBU jacket and rob the local liquor store.
-
Fiochi reduced recoil 00 buckshot. This stuff turns my S12 into a single shot gun. I can cycle Remington and Federal bulk packs all day long but this stuff doesn't have enough gas to even eject the spent shell.
-
+1 for Falcon73. Smooth, fast transaction and a hell of a deal.
-
I'll take it if it's still available.PM sent
-
Everything Esteban did is better, eh? Reference the pics on page 1. Extremely Custom? That gun looks like hell. Even if it shoots like a wet dream I would still be enraged at having spent so much money and having a gun that looked like that. But maybe that's just me. And putting that Tapco rail and handguard on a $2000+ gun... BLASPHEMY! Nothing less.
-
Fellas, I own 4 MD drums, from the 1st and 2nd runs, and I had to wait a hell of a lot longer than 3-4 months. I think I waited about 8+ months to get my 1st run drums and I was champing at the bit the whole way. The wait sucks but the product is completely worth it. Trust Mike, he hasn't screwed anyone yet and I don't believe he will start now.
-
I traded in my AR for a FAL when I came back from Iraq and I have never looked back. Get a DSA STG-58. You will not regret it.
-
I live in Ypsilanti, Michigan. For those of you who have no idea where that is we are about 30 mins. outside Detroit and around here we used to have a Ford plant, a GM plant, Visteon (auto parts supplier), as well as numerous other auto industry related companies. Today we have none of those plants, 20 % unemployment, skyrocketing crime, and empty houses everywhere. There are 8 empty houses on my street and it's only about 1/2 mile long.
We have a 60-75% recidivism rate for criminals (the rate depends on whether you count all crimes or just some)and we just went down to 28 police officers for 50,000+ people. That works out to 3 deputies on duty at any one time patrolling 50,000 people. The county sheriff says he's "got it under control". Ha fucking ha, what a joke. We also had the FBI conducting raids against militia members around here a few weeks ago. Massacre is a good term for what has happened around here. Fucking slaughter is more appropriate.
-
So... the 2 other mags are just being held in holders? Is that what is going on in that thing?
-
I'll take it if it's still available. Pm inbound.
WTS/WTT MPA930t mini MAC
in Pistols (WTS / WTT)
Posted
It is somewhat unsafe, which is why I chose to be upfront about it. I wouldn't want someone to get hurt by it. My son about crapped his pants when this thing went burst on him. He didn't panic when it happened and he kept control of the pistol but he has no desire to fire it again. The parts to fix the problem are pretty cheap but I have another, newer MAC and I don't want to mess with this thing. This gun is for someone who doesn't mind doing a little work and who realizes they will never really use that weight set sitting in their corner collecting dust.