saigafan2
-
Content Count
158 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Store
Posts posted by saigafan2
-
-
I am looking at lights/lanterns for my building were i shoot. I was looking into the hand crank type of lanterns or flashlights. I do not want anything that has to have a power source ie batteries or fuel or mantels, too much upkeep. I use this place for my shooting and when I get out there usually before dawn or stay after dark I would like some lights.
Does anyone have the crank type of lantern? Is there enough light for basic illumination for a 24x36 shed?
I stopped by a gander mtn today and looked at their lights and did not see anything of this type...have yet to hit wally world or K marts.
I am cheap and figure this will either get shot or broke/stolen before too long.
any input will be appreciated
thanks
-
I see these all the time in the shops around here for $8.95....but don't think that it goes to support anything but someones pockets.
-
MAG KITS ARE GONE AND SOME OF THE OIL BOTTLES ARE AS WELL BUT SEVERAL OIL BOTTLES LEFT.
THE SAIGA SUREFIRE MAG IS STILL AVAIL......X39
-
mag kit back up for sale... its been 5 days and no payment
-
any interest in anything listed above I would do free shipping.. let me know
-
-
gas tubes and some of the pg screws SPF
-
The AK pouch's would be $20 for the 5 Shipping.....I would do $7 for the 2 sets rather than $12
-
Sorry... In the preview I thought I saw the prices .
-
Mondial starter pistol, 6 shot... Model 1900...cal 6mm...Made in Italy
Box in excellent shape.
Instuction papers, cleaning brush and 6 shot insert also has the wax paper sheet too!
no chips no cracks in the grip..overall very good condition. shoots fine.
I will have to send UPS
$100 plus shipping will be sent out UPS will get your ZIP and figure out postage.
3 unc Canadian silver Half dollars 1964,65,and 66 all 3 bright shinny unc cond $25 for the 3
6 unc Canadian silver Dollars...2 1953 1 is a no strap..3 1965...1 1966 one of the 1965 is dull but all the rest are bright and shinny
$18 each or if want all I will go $100
USPS MO or PAYPAL PLUS FEES
priority box by USPS shipping method
-
Saiga 7.62x39 mag surefire 30 round used but good cond $20
2 compartment round oil bottles 4 for $10
2 compartment square oil bottles 3 for $10 several sets of each avail
AK mag rebuild kits can be used on 20, 30 or 40 round mags.... 5 sets avail.... included spring, follower and floor plate $ 5 each set SOLD
PSL mag rebuild kit 2 sets sold together 2 of each.. spring. follower, base plate and retainer 4 pcs total each set. NO RUST ON ANY PART
$25 for both sets SOLD
USPS MO OR PAYPAL PLUS FEES
$5 S&H priority box USPS shipping
-
First pic...#1 Saiga gas tubes take offs excellent cond $10 each bothSPF
#2 AK gas piston take off $8.00
#4 PG screw these are the big Heavy duty ones but standard threads 2 for $5 2 sets spf several left
#5 Made in USA muzzle break 14 X 1 LH THREAD AND DEEP THREADED $20
#6 S 12 bolt head... Last one Doug Ford had several years ago... has some pitting on rim of head but functions perfectly in my S-12.includes FP and all springs and pins $70
#7 AK upper hand guard and retainer $10
#8 Taurus lock key $5
#9 AK thread protectors 14x1 LH 1 new 1 used not welded $10 pr
#10 Saiga x39 bolt head repair kit new parts 2 extractors included all new parts $20
NEW ROMANIAN AK POUCH MADE IN ROMANIA TAGS ON SOME OF THEM 2 mag pouches 3 for $10 3 mag pouch 2 for $10 both are for 30 rd pouches SEVERAL OF EACH AVAILABLE
PSL POUCH NEW CONDITION $20 EACH 2 AVAILABLE
usps mo or paypal plus fees
$5 for S&H will put in USPS priority boxes and send out
Any orders on multiple sets of pouches will be an extra $2 for S&H.... needs a bigger box.....
-
#1 AK gas tube take off from Saiga rifles $10 eachspf
#2 AK gas piston take off $8.00
#4 AK grip screw these are the larger HD ones 2 for$5 several sets avail2 sets spf some still avail
#5 Made in USA muzzle break 14x1LH deep thread new cond $25
#6 S12 bolt head FP and all springs and pins some pitting on rim functions fine in my S12...last one from Doug Ford several years back $70
#7 AK upper HG and retainer $8
#8 taurus lock key $5 2 avail
#9 AK 14x1 thread proctector 1 new 1 used no weld $10 for both
#10 Saiga bolt reapir kit X39 al lnew parts and 2 extractors $20 a set several avail
AK mag pouches 2 cell 3 for $10 and 3 cell 2 for $10 Made in Romania all new cond not used 30 rd pouches
PSL mag pouch 2 avail $20 each new unissued
Plus $5 S&H USPS MO OR PAYPAL PLUS FEES will ship priority box USPS\
Multiple orders for pouches will be an extra $2 for postage...bigger box needed!!
-
Is Buffalo rock in Ottawa open yet? They did have a pit for blasting
-
I will take the Saiga dust cover.... pm inbound
-
I purchased 1 from Cadiz made by NSTAR I think. was made for the S12. threads stripped out first time out and would not lock on the S12 properly. No one would take it back so I purchased a NEF single shot .12 and TIG welded it permanently on and have had a load of fun since. Single shot is simplier than the semi auto load and then ammo in the chamber any day and I get 600 to 800 yards every launch. I never have followed the ball until it lands ...gets lost it goes so far and make sure of the spot weld inside the chamber for backspin. I will take it out several times a year and have fun with it.
-
pm me if you would if sale falls thru.
-
I would like to have an extra S-12 gas tube. If anyone has an extra and wants to part with it let me know.
thanks
-
I have yet to change out the factory stock and it does have an SGM recoil pad on it.
-
I have just got back from shooting my S-12 after being converted using CSS parts and an
ATI Scorpion PG. worked perfectly....but......... the recoil is so much more then the preconversion recoil.
I have had the gun since 07 and have gone thru over 5k rounds of everything and never had to quit because of sore trigger finger and arm.
I have several Saiga rifles I have converted without problems or discomfort.
I shot 150 rounds of asst lo, hi and magnums as I always do except the totals usually go more to the 250 to 300 rds
Is this just the difference in the shooting grips, meaning how the gun is held because of using a PG vs a standard stock?
I will go out later and do more shooting to see if this occurs again but this was not a fun experience after the conversion!!
thanks for any input....
-
I ordered 3 of them and had to file 75% of the lip off just to get to fit properly. I contacted the company and asked for a refund on the 2 I had not modified and never heard from them again. With so much of the feed lip gone I did not want to modify the other 2. My S-12 was an 07 RAA version.
The 1 mag functions but with so much of the lock gone I feel it will not last long.
-
Mags are sold.
thanks everyone
-
I have 2 Keepshooting 5 rd mags new and un modified.
will put in a USPS priority box and ship for $25 for both.
$10 each and $5 for the shipping........
Paypal or USPS MO
-
I just received my mags from them too and the filing seems to be about half of the catch. there is the width of a 4th stripe before the mag will seat in the gun. I have fitted lots of AK mags in both of my x39 conversions and with minor smoothing and filing they fit but these are huge amounts of mag catch to get to fit.
Anyone have input?
I compared them to my existing mags and I am already smaller than them in what I have filed.
replacing the recoil springd
in Saiga-12
Posted
I am wanting to replace both springs on the recoil assembly. I have found 2007 articles on using 17 to 22 lb 1911 springs and have used some of them myself over the years. I don't remember the lb strength.
Are both of these springs the same strength or are they different? I see CSS has the Tromix spring for $7.99 can I order 2 and just replace both I have and continue shooting?
I have 3 years of shooting on the current spring and have never replaced the rear spring since 07.
any input will be appreciated.
when I go out shooting i mix all sorts of loads and lengths of ammo so do not want a specific heavy duty for only 3" type of spring... I want an all around shoot anything spring like factory.