Jump to content

xbox360

Member
 View Profile  See their activity

  • Content Count

    139

  • Joined

  • Last visited

 Content Type 

Everything posted by xbox360

  1. xbox360
    do I need to install the retention spring back in? will it screw my gun up if I dont have it? Right now I cant because the pistol grip nut is in the way, I had to put a 7 inch long screw in with a washer and a nut inside the recever and a nut inside the pistol grip to hold it TEMP because I tryed 5 different screws and NON OF THEM WORK WITH THE PISTOL GRIP, EVEN THE SCREW THAT CAME WITH IT! TO SHORT!!!!!!
  2. xbox360
    everyone is off topic please lock this thread as I do not need any more help on the trigger guard/
  3. xbox360
    dont worry I got it off Thank God. TRIGGER GUARD/PLATE IS OFF !!! so is rivets ;D! now to file down the trigger guard place, screw, place back the FCG and done
  4. xbox360
    Lol eek? whats the matter its just ranking on a website so? I dont care I need help on the task at and
  5. xbox360
    I would like to keep this one thank you, what do you mean drill it through and punch it out? how can I do that because my punch will fall through the hole, I cant punch air out lol, you mean drill almost through and then punch? also this will be drilling/punching from the inside of the recever, I cant get the trigger guard off still.
  6. xbox360
    I tryed hammering punch sets into the trigger plate from the inside didnt work... what if I drilled the MIDDLE rivet [the one under the trigger guard] from the inside??? should I drill all the way through or almost all the way, then PUNCH it ??? what do you recommend?
  7. xbox360
    should I put it on a stand, put the screw driver in the middle of the trigger guard, and just POND down? I hope most of the welding is off
  8. xbox360
    ok trigger guard forward was very hard to ge done, a junky hole I drilled took2 days to get this out.... please help I cant get the trigger guard off, so I can drill the middle rivet to remove te trigger PLATE....
  9. xbox360
    Watch these videos. you should be able to complete and answer all of your question from the video. I converted mine with this video alone. I have watched them I seen them a few times, that is how I know what I am doing[cept for removing the trigger PLATE] + cross-con site
  10. xbox360
    Opps I was talking about 2 things, Rivet on the back and the trigger guard, ok I understand what you mean with the screw driver tto pop it, what about the back rivet how do I remove that?
  11. xbox360
    Drill through the spot weld and then get a screwdriver underneath it and pop it apart. Did you read the directions posted or watch any of the ? what do you mean pop it? I drill through the hole spot weld[back rivet the one that connects to buttstock.] I cant get it off I pushed I used rubber hammers to hit it, nothing. I even expanded the the hole with the drill bit. NOT IN MY RECVER its fine
  12. xbox360
    OK UPDATED> Thank God I got my hand held drill to work! I DRILLED THROUGH THE BACK RIVET!!! now how do I get the trigger guard off?? I center punched and I pushed down alll this metal was flying out of the hole! I went stright through the rivets.[outside was filed for FLAT drilling area] The trigger guard is welded on the trigger plate, so how do I remove this?
  13. xbox360
    ' a punch? you can PUNCH them out????? I thought they where welded to the recver that is why STEP 3 shows the guy drilling them out\ \ the video make it look so EZ..
  14. xbox360
    OK UPDATED> Thank God I got my hand held drill to work! I DRILLED THROUGH THE BACK RIVET!!! now how do I get the trigger guard off?? I center punched and I pushed down alll this metal was flying out of the hole! I went stright through the rivets.[outside was filed for FLAT drilling area] The trigger guard is welded on the trigger plate, so how do I remove this?
  15. xbox360
    I notice theres a BIG rivet cap on the recver inside and out. I thought about putting some cardboard over the the rivet inside the recver to prevent fileing into the recver, is this a good idea or no??? I dont know if it will drill out when I drill it that is why I am thinking about filing it... Tell me how you got your rivets off??? I dont think a stright drill through would remove it because the edges are welded on...
  16. xbox360
    it needs a chuck key *sign*
  17. xbox360
    any tips how to remove this bit off the black and decker.... I have tryed for 1 hour to remove it! I have used grippers/pliers and it wont move, maybe its rusted inside? what should I do.
  18. xbox360
    a TROLL
  19. xbox360
    THANK GOD! I went out to my shed and looked around I looked and looked for a dremmel. I didnt find 1 but I found a High powerd Corded drill/cutter thingy by black and decker Its like 10 years old but should do the job!!!! It fits drill bit heads, It has this old rusty saw on it lol... Will this work guys? I know its not a DREMMEL but it should work? it reads, 120V AC 60 or 65 HZ cant make it out, 3.5A No rpm stated
  20. xbox360
    thats nice i wish I had a dremmel for this job
  21. xbox360
    no. I cant even GET THE FIRST TRIGGER GUARD HOLE OUT I am not doing the drill hole in the reciver mag lever to hard and It will hold with 1 screw. I made a few dril holes but I cant get down in further it just WONT DRILL., I thought about taking my nail and hammering from the inside to make a new hole start then drill is that SAFE??????
  22. xbox360
    well I bought some new drill bits. I just cant drill out anything.... I pushed pushed and pushed and I cant get it to drill in..... This the front trigger guard hole.
  23. xbox360
    yea, these bits suck. I am getting a kobalt or something good. But did you use oil? I just let mine cool down
  24. xbox360
    Be sure to use a backing anvil when you center punch, or you will distort the receiver. this is on the revets... where do I play this anvill????? I just lay this on my table and pound the center punch into the rivet hole. is that safe or no??? theres NO WAY you can put a anvill inside the recvr ps. This is step 3, what did you guys do for punching out the rivets?
  25. xbox360
    what type of oil? and why? I thought you only needed oil for the TAP on bullet guides. It will be a mess with oil
×
×
  • Create New...