bruh44
-
Content Count
46 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Store
Posts posted by bruh44
-
-
I may have had the number wrong for MD Arms. Their number is (937) 552-9383. But of course no one answers and the mailbox is full.
-
E-clip is fine, but I would prefer to have original parts. Part of the reason I collect guns is because of the investment aspect of it. I don't even care if they charge me for the part. I just want the part for this mag. I've been trying to get in contact for months. I haven't received a reply of any sort as of yet. I thought maybe they would see they have an irritated customer with this thread and actually respond for a change.
Also when I contacted Copes they said they don't deal with MD anymore. I told them I have been trying to get in touch with them for a long time but they won't reply. The woman said "I hear that a lot."
-
I had a simple part fall of my mag while shooting. I have e-mailed them at least 5 times to get a replacement with no response. I found a telephone number (937) 552-9393 listed for their business profile but it isn't in service. Personally I think they should be removed from this web site. They still sell their products but worn't reply to customers with issues.
-
I've emailed MD Arms several times, no response. Copes said they don't service their mags. I found a number listed for their business profile, but it's not in service. I'm glad it's just a small part because this company is very poorly run, and I won't be doing business with them anymore.
-
MDarms.com was down. I see it's back up. I'll email them.
-
I got a 20 round MD arms drum that the metal clip that attaches in the middle fell off while I was shooting at some point. Where/how can I get a replacement?
-
I'm looking to pick up the Eagle six mag chest rig. If you have one you can part with e-mail me.
-
SOLD
All Parts have been sold.
$200.00 or best offer for all parts. I may seperate if no one wants them all.
The Tapco fore arm is for a regular Saiga AK, not the S12.
The gas plug is the 4 position plug.
The cleaning rod is for an S12, and may (I'm not sure if it will or not) fit under an RPK barrel but is too long to mount under a regular AK.
The bolt is for a 5.45X39 AK.
Both Buttstocks are Warsaw length.
I think everything else is self explanitory for you AK junkies.
I'm not looking for anything in trade but I'm always open to offers. E-mail me with any questions.
You can check my feedback on ar15.com under the same name.
EDIT:
So it's looking like I'll be parting this out based on interest (I have this same post on other forums). Since I'm not a dealer I'm just trying to keep my prices under one of the AK parts dealers that I use. If what I'm asking is too highbased on a dealer price you know of I won't be offended if you e-mail or PM me that price. I think the price for the whole kit satisfies the rules of the board for now. I'll do some more research and price out everything individually tomorrow.
-
Spaghetti, duct tape, elbow grease and just a liiiiittle bit of crack cocaine.
So I tried this method. Smoking Spaghetti, and trying to push crack rocks into the holes just isn't working for me.
Actually the gun I have has a hole that helps hold the handguard in that I'd like to fill. There was also a slot cut for a bolt hold open next to the trigger that I'd like to fill. I got it with the bolt hold open, but I'm not a fan of them.
- 1
-
So I don't weld. How can I fill the holes? Do I just need to send it off? Will Bondo work?
-
I'll sell mine for $25.00 shipped with paypal. let me know if your interested.
-
DAMN! I should have held out for this one!: http://www.gunbroker...?Item=281230559
O wait better yet!!!: http://www.gunbroker.com/Auction/ViewItem.aspx?Item=281227076
Ahhh gunbroker sucks ass.
-
I just ran about 200 rounds through it, flawless. I ordered a Bulgarian parts kit to finish the conversion. It's always nice to have a gun project to work on.
-
I'm going to replace the grip with the Molot clone grip, and I just bought a parts kit to finish the conversion. I'll post pictures when it's finished in a few months.
-
I'm semi up on AK value, so I think I did pretty good. I paid $450.00 for this:
I plan to run it tomorrow to make sure there are no issues. Where is a good place to get the parts to put the standard handguard and parts for it? Apex has a 5.45 parts kit that looks like it might have everything I need other than the black plastic hand guards. Any recomendations?
-
You think using a wire brush would be ok to start? I'm not sending this thing off again, It's been out of my possesion for about a year of the year and three months I've owned it.
-
Guess I'll get the dremmel and buffer attachement out.
-
The inside of the reciever was painted. It was parkerized then duracoated. The empty shells don't eject out of the chamber. The slugs took a few rounds to get them to cycle. I've been working the action for two days now. I'm hoping it helps. I can't imagine paint would stop a 00 buck round from cycling but I'm not sure.
-
I so I picked up this S12 about a year and a half ago from one of the companies thats a suporter here. They made a great gun, but the finish was terrible. The gun ran 100%. I told them I wasn't happy with the finish, the owner said send it it, I'll fix it. About six months after I sent it back to get refinished I was starting to get pretty pissed about it. He said he would add some things to the gun to make up for the time. After about nine months when I threatened to sue him, I got the gun back with a crappier paint job than the first one. I got some money out of him to get it refinished and sent it off to Tim at Gewehrwerks Who actually knows how to paint and handle things in a reasonable time frame. The gun looks great now, but I took it to the range the other day and in the lowest gas setting it will barely cycle 1oz. slugs. I know since it's been refinished it needs to be broken in again, but it won't cycle 00 buck at all. I tried an aftermarket gas plug, and puck, but the factory seems to work best. What else can I do to get this to run on anything lighter than slugs? One of the additions what a thicker piston so I'm wondering if that has something to do with it.
-
I second that!
I have held off ordering a gas plug for awhile, just waiting for this one to become available.
LB
Me too. I'm hoping to get one of these pretty soon.
-
2, 4, and 5. Someone beat me to 3.
-
It's been sold on AR15.com. Thanks all.
-
Cadiz did this for me:
- 1
-
Any idea on a release date? I was about to get the other one you sell until I saw this.
WTB: Saiga 12 rear trunnion
in Want To Buy (WTB)
Posted
Looking to pick up a S12 rear trunnion let me know if you have one.