elia.jon1
-
Content Count
235 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Store
Posts posted by elia.jon1
-
-
the romanian wire folder, and the tantal stock bolt up just like a fixed stock does.....you do have a rear trunion on your saiga....
its the "tang"
-
nah...the real ninja always mounts his HORIZONTAL grips on his optics....duh
-
if you look at the close up its appears photoshopped....
-
credit cards in half with the glock 9mm......skinny ways of course....
and i had some shitty 9mm ammo that wouldnt run in a storm lake conversion barrel for my g22(40 ->9mm) i put one of these rounds on top of the backstop and managed to perfectly put a 9mm round thru a 9mm round standing on end(cut a half circle in the brass) from about 15 yards....
not the most impressive but it showed me the storm lake barrel was as accurate as i thought it was
not the best shots ever, but luckily i had witnesses to these events, it put a smile on my face
-
like post-ap said boresnake that bitch.....
and i find the s12 much easier to load when i have it on my shoulder aimed downrange....ymmv
-
long ago before clarification that was considered the gas piston, then it changed to the puck in the shotguns....
it was screwed in drilled and pinned.....thats how all my ak's are....
the stainless ones ate drill bits
heres the at home fix...
drill from 3 o click position to the nine o clock position take a nail that fits your hole, cut it off and peen it to stay...you will be good....
but that "gas piston" only counts as part of the bolt carrier and wont count as a compliance part.....but the puck does...
-
the big difference is like an inch.....
i'm 6'2'' and have grown to like the warsaw size....
-
1
-
-
why doesn't someone make a "ak 100 series side folder type stock" skeleton(i prefer) or solid...that bolts up to the ace hinge?
-
i dont see why anyone would pick the saiga over the ak....i mean its not only full auto...you can do singles with it too......
-
the dmv in gilmer tx has a revolver bbq out back...not quite soo fancy, but same concept.....its a single action and predates the 500 i think...
-
i guess it must be a east texas(north east) all the way to dallas....i've never had anyone round here call it us20 or us30, or us635, or any of that.....
....blue and red sign might be a us highway but its called an interstate in ne texas ...remember that if you get directions around dallas, tyler, shreveport, and the towns(cities) in between they will just call them I-XX
-
i did a writeup a long time ago in the x39 section probably mid 04....using a drill bit and a dremel cutoff wheel.....
besides the conversions its probably the best mod i've done to the saiga....
....that bitch gets hot with no room to vent
-
i dont know what the hell yall mean but insterstates can run n/s or w/e......the even numbners are w/e the odd numbers are n/s
i-20......i-30.....
Louisiana has interstate 49 going south off i-20.....
if someone told me they were looking for u.s. 20 i would know what they meant but i'd tell them its called interstate or i20......
....edit* posted same time as paul...and he is right, they were made for moving troops, and landing planes....
-
While I have an extreme degree of respect for your products overall, I frankly don't see this serving as a functional bayonet. Too many spikes too close together guaranteed to catch 2 or more ribs in a chest thrust, blocking deep penetration and exsanguination. There is a reason that hundreds of years of firearms engineering have focused on a long, single spike as a bayonet to be both terrifying and functional.
For seriously intense bad-assitude, this product is without peer. To do actual damage to an enemy...........YMMV.
Absolutely no disrespect intended towards the manufacturer, which has an excellent rep. But this particlular product seems more theatrical than tactical. Would look scary as shite,though in some action or SF movie..........
i'm thinking some treaties have gotten rid of the best kind of knife and bayonet.....the more than 2 sided ones......3 and 4 side blades do better...nasty holes, hard to close.....
-
i used dental floss.....
double a long piece of floss....put it thru the hole (the o in the spring)
legs down insert dental floss into bho slot....
....get the one leg on the little bho ledge.....pull down on floss finish pushing pin in.....
(this assumes you already have the pin in the trigger some.....
^ cobra brought this idea up a long time ago, i'm pretty sure it was him....
and on my 7.62 and my s12 a double hook g2 and the factory trigger works fine.....no runaway gun.....
....now a factory trigger and a g2 hammer has caused a friend of mine to shit.....we got that taken care of tho....
you should try and test fire on a private range lol.....
-
this will maybe help you with your surefires, i discussed it at length with kevin of agp when i was having all my agp mags break the springs.......
find a cheap ak47 40 round magazine(rebuild kit if you can or just a cheap mag)
take apart said 40 rounder....take apart the faulty 12ga mag......
replace spring with 40rd ak mag spring.......
it will fit great, and should be stouter than your factory 12ga spring.....
this has worked great in 2 of my agps for years.......(i just happened to have some 40rd springs)
-
countring the fcg which is 3...and the tapco stock which is one more you only have 4 us made parts......that means you need 1 more....a us made pgrip would even it up to the magic #10.....the isreali parts are imported too so they dont help your count.....
you NEED to either do a us made gas piston, us made handguard or us made p grip......if you want your grip and handguard go with the gas piston....
-
your saiga "trigger hook/ disconector combo" has one inside of it.....
-
arent those for not getting carjacked?
-
stay out of jefferson parish, unless you want steven segal going lawman on yalls asses.....
-
return it....he told you what you would get.....you did not get this....give the gun up without ever shooting it, demand a full refund(maybe minus shipping) and then like the other people said diy and what you cant do have someone who wont f up your s do it....some pretty good forum members can do alot of work......
be careful some of these guys have been working on saiga's since the awb expired...alot of them came around to make money in this particular marketplace....do your research....some of these guys like saiga's and money.....some just like money...
....and if this might offend a business member....he might be one of the late comers....(not pointed at anyone specifically)
-
Yeah they leave out that many of those traced firearms belong to their army. They also leave our that RPGs are not sold in gun stores, nor are hand grenades.
Like.. Colt makes M-4's.. Mexican Gov buys colt's... cartel "steals" guns... then blame USA????
Did I fuigure it out!!!???
ok so today i brought this up in a government class.......they tried to shoot down this argument, because i couldn't "prove" they were getting the guns from the mexican police/military
they didn't want to hear the argument that they are using machine guns, rpg s , and grenades....
they(meaning most of the class) also thinks the cartels would "buy" guns because they have so much money...no one could understand this...
u have guns for sale...
i am criminal trying to get guns....
i can buy...then have guns and less money....
or
i can kill(u) and steal(the guns u were selling) and then have the guns and all my money....
they thought this idea ridiculous because, again, because i could not prove it was happening.....
fucking people......fuck.....
-
its marked to 300....but has all the settings of its 1000m brethren.....
-
around the time of the sunset a bunch of hesse converted saigas were floating around.....my x39 is from 03.....bought it for like 150, this place was great back then lol......
MJS GLOBAL
in Saiga .410
Posted
for some reason every s12 mag i have tried in mine fits....my promag i bought when the first came out was a little tighter...
but the ak style front post, while its supposedly made in russia why did it have a made in china sticker on the box(package)?
if someone has the answer to that please pm me