-
Content Count
240 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Store
Posts posted by kindapointless
-
-
So anyone know what the exact problem is with getting spare parts imported? I know they have to make them? I just want to know if anyone has any info before I call mercury Hermes
-
so any one know what happened to the 30-06? How many were imported? When did the last ones get brought in? Any plans to start importing again? At one point someone was talking about converting a s308 to 30-06 anyone remember this because I can't find the thread. I don't know why I want one I just do.
-
-
What platform would that be? I would be interested in a flat just to try to make a fully rifled s12 or to get carried away and try to come up with a 10 gauge version
-
which ones would this be? The extra heavy duty 1.5mm? I had been thinking about a rpk based one. Build my own veper
-
I wouldn't worry that much about it. I really doubt them coming to take it. It would get messy too fast too many people having a ptsd incident over rights we fought for.
-
wow did you guys read the comments at the bottom. Wow the stupid people are breeding. On a side note anyone know where I can get a Target like that? I wonder if I would get booted from the range?
-
-
Congrats on joining the wild world of the Saiga 12. First thing you should know is that most things on this weapon system need a little tweaking to work. Don't be scared by this fact. DON'T PANIC! The fact that most things can then be custom fitted to your weapon allowing you to have it just how you like it. It scares some people off but if you stick with it you can have a weapon that will outperform anything out there. All right now to your problem. Most of the magazines have to be fitted to your gun nothing odd about this I personally like it because I like tight fitting mags. Some manufacturers even include instructions for this like the aforementioned drum from md arms. If you have a dremel it takes just a minute to fit them. Just go slow and if you take to much off build it back up with jb weld. Good luck and remember at this point most problems have been seen before so don't worry were here to help
-
When you were firing the high brass how was your fte? Did it stovepipe out the ejection port or did it remain in the breech? I'm just wondering how underpowered you are. Did you try high brass on setting 1 and 2?
-
I had found 5 for 500 a piece a couple weeks ago at local store but I just called and the others I didn't get are on layaway. Guy said call back Friday and see if they were picked up if not I can get them. Best bet right now is call small out of the way gun shops. I have found 10 in the past month that away.
-
First thing I did was completely dissasemble the entire gun and inspected all my parts just because I wanted to know how my new weapons system worked. I checked my gas ports and realigned my sight block. I then restored the fcg to the way its supposed to be. Profiled the hammer myself and then polished the bolt bolt carrier and the carrier rails in the reciver. I did this all without even shooting it once. I now put about 400 rounds a week through it with only the occasional problem and that stems from the dirty ammo I shoot. It cycles everything but winchester bulk and it will still try it just not 100 percent. Factory plug and puck.
-
Out of the four promag mags I have only my original one works right. My gunstore threw it in for free when I bought my s12 and it has been the best mag besides my factory one. The other promag ones are junk. I don't know what is different about this one but it works better then my agp mags for crap ammo.
-
With that hole off center in the gas block like that you could very well have three ports in the barrel but have them blocked by the incorrect gas block? When you fire it does your carrier move at all? Does it move partially back?
-
Hi all just wondering if anyone has worn out a mag yet? I have about 3500 rounds through my original 10round promag and it is starting to get kind of sloppy not only on locking in but feedlips look worn and follower kind of looks beat.I know promag is not the best but it was my first mag so I guess I'm kind of attached to it so I use it more then the others.
-
169.00 so that's not bad for a plinker
-
TThey might not because of overall length 2 and three quarters seems subjective to whoever is building the rounds. They can vary by a good deal
-
I have one of mine next to nightstand right now loaded factory mag with 15 pellet buck and two more mags of ko slugs on nightstand. I found out about the Saiga 12 while in Iraq. I picked up some scruffy looking guys in the middle of nowhere and they all had these crazy looking shotguns. I asked some questions and decided I needed a few. I can't actually think of a weapon I would rather have for home defense. The amount of lead you can bring to bear on a Target is awe inspiring. And I love shock and awe. That's what this thing does best. Let loose with a md20 and nothing will stand against it.
- 1
-
u hit the nail on the head. The more you know the better you will be. My friend is an accountant he's great with numbers useless with any real world skills. He's one of the ones that is tripping out wanting to buy property and cows. He has been trying to get me to teach him stuff. Up until that point I thought some things were common knowledge. Boy was I wrong. I guess we were just raised different. That's what got me wondering about skills.
- 1
-
Yeah maybe the soap thing was a bad example. More like how to fix your own shit. Sometimes I forget people can't even work on their own equipment. Maybe repair their own roof stuff like that. It's like that old 8n tractor that someone keeps limping along. You know it well and most the time fix it yourself to keep going. I know some people who if they had anything happen they would be screwed because they know nothing they need somebody to do everything even fixing a leaky faucet.
-
The AK22 was included just to get her one that looks like the rest of my guns which is what she wants. My local store is taking orders for them already
-
Wow we always had to account for everthing. Most also have satellite tracking on their rigs now. You should be able to see everywhere the truck was. Has atf kept you informed so far? All the edits for auto correction retardation
-
The batf would flag the numbers so a normal gunstore would be out but you could get rid of them at gun shows because of no check. I could see these being plotted on by a small transport company. I used to do logistics and even back then there was a setup where a guy at customs checked things in then told a group where it was going and on which truck. Sometimes the whole truck would go missing. That's why they say don't mark firearms on them
-
I thought about like a ball n shot combo. a large ball in front with a tail made out of birdshot. When it would impact something the ball would slow down but the shot would still be moving maybe ramping down the ball to be thrown to the sides makin a bigger hole
spare parts?
in Saiga-12
Posted
Mercury Hermes wasn't that helpful and honestly seemed a little "off" to me.