[10 Round Mags at Gunsmoke in Crawfordsville FL]

When I was trying to get my saiga I ordered it first from FGW. Well, after waiting a month I called and emailed them. They had charged my card already but I finally got to them and they refunded it. BTW they had none in stock and had no clue when they would get more.

[I'M TOO EXCITED TO SLEEP!!!!!!]

I am taking my Tromix 8" to work with me, along with 50 rds of wolf 00buck.

 

OKOKok, count sheep, one sheep, two sheep BANG! HAHA I can get ten sheep!! WITHOUT RELOADING!!!

 

 

Does that have anyone else slightly worried?

[Threading for a choke]

Ok so I have everything together to SBR my saiga. My local class 3 can cut and crown the barrel for my saiga but I dont know that they can thread the internals for a choke. Keep in mind the barrel cut is only $25, I am not looking to sink $100 in a polychoke that I cant remove. Anyone know anyone that can do a class 3 internal choke like benelli or remchoke.

[Rifle length piston]

Ok so I am going to do an SBR setup and was wondering if normal AK pistons will fit for the sake of moving the gas block back? Has anyone tried a standard ak or krink rod?

[Any word on the AGP 10 round mags?]

They better get cracking before everyone makes the 5s into 10s and says screw the wait.

[Saiga at another 3gun]

Konga what optic is that, Eric has a birthday coming up and I might get him an optic.

 

 

The optic is a bushnell something. I think I paid 75 for it from cheaper than dirt. It is not like the BSA crap that washes out. The brightest setting on this does hurt so I dont use it.

 

As for choke tube, there is no point in getting a polychoke and getting it installed if I am going to SBR it. My barrel is just over 18 with the choke welded on. I am goint to get it 10inches with this mounted. Then I will get something like this.

[Saiga at another 3gun]

Ok so I got to shoot my saiga at another 3 gun at Black Creek this weekend. It was great with the optic on it and made all the difference. The 5 rounders were a little easier to load too. My only complaint is that the spread is still too wide and I capped some no shoots along with my shoot targets.

 

My next thing will be an ACE stock and SBR to 10inches.

 

Reply since edit is broken

[used saiga 20 that I want to convert. What can I get away with]

You all need to do something about those jacked up laws up there.

[Brownells Gun Kote or Teflon/Moly]

Well I was getting ready to clean my 226 later with break cleaner. I guess we will find out then.

Beyond 50 you are in the realm of the 10 rounders. I dont know the cost of the things there but dude could probably charge $25 not including shipping and still make money off the deal over there. In fact he could probably sell more than he could get his hands on.

Well the damn things shouldnt cost more than $50.

Ok so the russian english translators suck about as bad as the spanish ones. Still, pretty good for someone that doesnt speak any russian.

Lekss,

 

Do you know of any places in russia that will sell plastic mags online and ship internationally?

[Florida PD SWAT demo - Testing report]

How are they getting the 8 rounders? Do you have a source for those?

 

Anyway, I am probably going to send my shotgun to you soon. Emailed you about it last week, about just needing the barrel shortened but I might get with you about cleaning up the conversion I did and installing a polychoke on the 8inch. The spread and lack of sighting killed me on the last shotgun match I shot.

The guy that does the metal decided to stop and sell his stuff. Dont ask my why, maybe he doesnt like making money.

[This can't be true. How the Hell]

-->

QUOTE(G O B @ Aug 30 2006, 05:49 PM) <{POST_SNAPBACK}>

No matter how many times we post the rulings, laws, and regulations--some moron always thinks they can get whatever they want. If it is a shotgun and semi-auto it cannot have a NLFD. Period. That is the cold hard facts.

 

 

Yeh, you cant have it because the internet told us we couldnt. Ghestopo will drop down through the roof and take your shotgun.

[Demonstration: Man is shot with .308 while wearing body armor]

Ask any of the 3 gun or IPSC guys what happens when you shoot one of those 50lb plates when it isnt ajusted so that it falls over with a slight push. I have shot steel that is not properly calibrated, ie leaning forward a little, and it goes no where. That steel is only between 50 to 75 lbs at the most and it does not go flying. The only reason it falls is because it is knocked off balance. Now take a person that is wearing a vest, they are not going to fall over. Next look at the person that isnt wearing a vest and you would see that the force is being spread out over a longer time and maybe not transfered completely due to heat or the bullet exiting. That person might fall over due to pain or the wound but they are not thrown by the bullet.

[Something to think about with all the DD talk]

Can you post a link to the semi remington conversion info?

[Got my S12 back from RAA]

Mine worked fine with lowbrass. I didnt try it in a lower gas port setting but it worked fine.

[Got my S12 back from RAA]

Brought my saiga back in the house this afternoon, oops, forgot I didnt send mine back to RRA.

[DD question]

If it were a DD none of the other NFA rules count right?

 

Looking at the DD law it says except shotgun. How did they jack up the striker 12 then?

[10 round mags]

That magwell looks like a good idea. Also, I remember the one on firefly being all crome.

[Any 3-gun competitors here?]

I get angry at stages like that too. I can understand ending a stage with a shot at a fake engine block with a slug or something but not switching back and forth over and over. Another one of my petpeives is the matches that have you start with 6 rounds in your semi and every reload is 6.

[Any 3-gun competitors here?]

People do dickish stuff like that so they dont have to change something they do. Sort of like that calibrating the steel for 308 I was telling you about.