-
Content Count
45 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Store
Posts posted by Aksierra
-
-
I have a couple 1911 parts for sale from a fullsize Springfield 1911.Springfield .45 Barrel - 5" with link, pin, and bushing, low round count. $105 shipped
I.L.S. mainspring housing assembly. Allows you to lock your 1911 to keep the slide/hammer from being cocked. Comes with everything needed to put into your frame. $45 shipped
shoot me a PM if interested
-
Sold Outright Locally
-
Im looking for a AK47 parts kit for a project i want to build for my dad. I have a new P13.45 Para 1911 double stack frame im looking to trade if theres any interest. Frame is in the raw but is 100% so I would need to be transferred through an FFL. It comes with one new magazine and a trigger.
If there is an interest pm me and we can work out something. I have some other 1911 parts as well. -
if you refer to the previous thread about this you will see they are being fulfilled as they come available. http://forum.saiga-12.com/index.php?/topic/84046-agp-magazine-availability-update/
As for you card being charged, mine was charged as well and i ordered on the 10th of Jan. If your really wanting mags i would just sit tight and wait for them to show up, there is no ban as of yet, so your order is expected to be delivered. If something comes to light and the orders are not fulfilled, then i would expect a refund.
-
I had this same thought, i know it wouldnt cycle a semi, but they could be handy in a SHTF situation if you needed to ignite something from a distance?
-
i ordered some 12 rounders from the estore yesterday, $45 each. they are out of stock today though.
-
Updated Price, I will take $110 shipped i can take Discreet paypal + fee
-
Not sure if it has been posted yet, but my friend sent me a link to this video by Sheri of Noveske rifle works. Some good shit
- 4
-
Still available until the 25th, after that i will be out of state and its going back in the closet.
-
This....308 is not cheap to shoot and most likely will not be getting any cheaper. 12g is pretty consistent in price and usually more readily available then .308, locally atleast.That said, however the S12 is setup needs to be known. If i had other semi auto 'modern sporting rifles', and didn't have an S12, or semi auto shotgun, then it would be awfully tempting.
If you have multiples and could ditch your least favorite rifle to get one to expand your collection, it might be worth it value aside. If you decide to go for the trade, Just be prepared that the saiga may require some fine tuning.
-
Yes they will, my card was charged a couple days after I placed my order. And the only discounts are for quantity. 10-99 gets you 20% off
-
What is done to the saiga 12? And what accessories does it have? If its just a basic conversion with some mags, my opinion the AR10 is probably worth more. But it's hard to say without seeing both weapons. The saiga 12 is a great weapon, but you have to remember, before all this drama a base unconverted saiga was roughly $650, add maybe $200 for conversion parts, and whatever else $$ wise.I have a 94' AWB compliant Armalite AR10A2 and I might be able to trade it for a slightly above average accessorized and converted Saiga-12. Would you make that deal in this market?
-
good to know, i ordered some on the 10th, i dont mind waiting as long as they actually show up
-
Im interested in the 10 rounders, i sent you a PM
-
Well if they are still available on payday I'm going to have to pick one up
-
-
This Huey would be a blast to fly. But since the data plate is gone, It would take an extreme amount of paperwork to get this bird in legal standing with the FAA though. Experimental/exhibition category only.
-
Nice conversion! Did you buy yours with the polished bolt and carrier? If you get a folding stock, make sure it folds to the left. I got mine with the conversion kit and it folds to the right, covering the safety and interferes with the charge handle. Retarded design IMO. I do have a Hogue grip and love it! Locktight EVERYTHING because shit will rattle loose when you shoot it. Nice build and thank you and good luck with your Army service.
I bought it with the stock painted bolt carrier but the paint was starting to wear off on the tip of the charging handle. I did a semi polish on it by glass beading the the carrier to remove the paint, then used a steel wire wheel to remove the frosted look. I was not to concerned about making it a mirror finish, the only thing i actually put a little more work into was where the rails ride, and on the bottom face where the hammer contacts.
Which stock did you use that folds to the right?
Ill be sure to go back and loctite any screws that might loosen up. Its my pleasure and thank you for your suggestions and feedback.
-
I have a brand new MWG 90 Rounder AR drum for sale. The box is opened but its unused, iv only inserted it into a magwell to check for fitment at lockup. Im looking to trade for some Saiga 12 mags, or an AR-15 lower parts kit and stock kit.
Let me know what you have.
Thanks
$110 ShippedSold and shipped to Jeluvsk -
Thats what I wanted to do when i joined the Marine Corps many years ago, well not for that particilar aircraft, but as a general helicopter crew chief mechanic. But they did what most USMC recruiters do, and thats by conning me into another MOS saying my eyesight wasnt good enough. Found out later that my eyesight is indeed good enough, enough so that i met requirements to be able to fly aircraft with the USAF. But oh well.
Sorry for getting off topic. Just wish you the best of luck with basic and your military career. And dont be pulling out any "stress cards" while your there. Last I checked the insurgents and taliban dont accept them in combat. Haha.
And cant wait to see what your final build looks like
Well Thank You, And thank you for your service as well.
I made sure i got the MOS that i wanted or it was no dice. I do maintenance on small airplane engine stuff right now as my civilian job so the maintenance aspect should be pretty straight forward, but i am hoping to transition into a warrant position eventually and get to fly them.
And I have been told about the "stress cards", they may be there, but pulling them means you become the Drill Sargent's new best friend lol.
Ill be sure to keep my build thread updated.
-
What branch of service? Good job on the conversion.
Army, going in as a 15T, UH-60 Repairer. Only doing part time, but aviation is activated quite a bit from what i hear.
some people asking about this - bumped..Good job, nice pics!
Thanks, I have a few more pics, but they are just of the milling and stuff like that, figured id save someone the bandwidth lol
-
looking good! have you tried it out yet?
Thanks. I have not had the time to try it out yet, i know i should have tested it before the conversion but if there is an issue ill tackle it as it presents its self lol.
-
Hey Guys, So i picked up my first Saiga at the end of Nov used from a local guy for a decent deal. Came with a 10 round mag and a T6 stock/grip combo. I was going to hold off on the conversion but after feeling the trigger I knew it needed to be done sooner. And since I'm leaving this month for basic i wanted to make sure i had enough time to finish it before i left.
The conversion cost me roughly $140 which includes the Tools i needed. And since i have access to a mill, lathe, and TIG welder at work, i did all the mods myself. I ended up using the T6 stock with the pistol grip removed since the tapco ak stock is a little shorter than i like.
Total list of Work done:Removed old trigger partsRemoved old trigger guardMod bolt hold open lever for safety lever clearanceMod trigger pin retaining plateMod new trigger and hammer for fitment and overtravel bump stopCut hole for pistol grip nutWeld up 6 old holes, 2 from the trigger guard, 4 from the old trigger pinsWeld on Pistol grip reinforcement plateBlend weldsPaint, and Bake cureParts UsedTapco G2 Double Hook trigger setTapco Ak buttstockTapco Pistol grip nutHogue Ak GripTrigger guard Kit and drill jig from Cobra Customs (thanks again Shannon and Sandi)The conversion may be finished, but shes far from done. I still have a few things i would like to do to it when time and money allow.Future modsAk100 folding stockSaiga Rifle Handguard or Rail system (have not decided yet)Update sightsExtended BHOTrigger pre travel ModAdjustable gas pluglarge or up-swept charging handleDoor Breaching CompPossible SBSAnd now for the photos -
If you hurry up you might be able to buy these dimond crusted agp mags, they have Unobtainium followers and platinum springs. Only $300 each!
http://www.ar15.com/forums/t_7_123/1088201_WTS_Lots_of_Mags___Saiga_12__AK74__AK47.html
WTB: Poly Recoil Pad & S12 Front Latch
in Want To Buy (WTB)
Posted
Im looking for one of the recoil pads for the AK100 Poly folding stock that allows the button to be pushed while installed. Also looking to get a front latch for the S12.
Shoot me a PM with what you have.
Thanks