[Saiga 12 police, size and material gas puck ?]

Problem soveld  😁 it was the too small puck.

[Saiga 12 police, size and material gas puck ?]

No, it also functions when stock is folded.

 

 

[Saiga 12 police, size and material gas puck ?]

Yes, the larger puck is already installed in my Saiga ...... I will test it on next wednesday ...hope it will function well . Material Nr. from the aftermarket puck e.g.  from CSS   seems to be Nr.   1.4542 ....

 

[Saiga 12 police, size and material gas puck ?]

It is a fixed gasblock, no adjustment possible.

I will try to get a matching aftermarket puck in Germany .....but this could be a problem

I will also look to the mag ...

 

Thanks

[Saiga 12 police, size and material gas puck ?]

Thanks for you answer.

 

There are 5 gas ports and they are continous.

There was no improvement when I shot for a longer time. Compared to the other Saiga 12 police i discovered that at my Saiga much more gas/dirt  went past the piston.

At first I will manufacture a puck from mild steel. I seems the origninal Saiga-puck is also from similar material.

 

 

[Saiga 12 police, size and material gas puck ?]

Hi,

I am from from Germany and since 1 year  owner or a Saiga 12 Police shotgun.  From the  beginning there are problems with ejecting the shells. I tried some methods to solve the problems (other recoilsprings, polishing bolt, other ammunition  .......) problems remained.

Now I  measured the gas puck and the boring on my Saiga.  There was a clearance of 0,23 mm.  Another Saiga Police which i compared  had only a clearance of  0,05 mm.

Could this large clearance be  a reason for the ejecting problems ?

From which material is the origianal puck ? It is magnetic.

Does it make sens to manufakture a puck from Titan oder stainless-steel ?

 

Best regards for your help

Reinhold