-
Content Count
102 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Store
Posts posted by mob
-
-
-
bought a BHO from him, quick ship, got here in great condition. would do business again
-
all have been SOLD as of this message, 7/7/2011 .
-
selling a new in box saiga 410 shotgun that has been properly coverted to pistol grip setup. it has a tapco stock with tapco G2 trigger setup. right now the trigger pin holes from the sporter condition are covered up but could be welded up to make ultra smooth.
I will take pics later and the mag has only been inserted to check for fitment.
the price is 575 plus ship and is 922r compliant. ready to take out and shoot.
my conversions are good and not half assed. there's a reason that I have a perfect score of over 70 on eBay , 20 on gunbroker and over 18 on uzitalk.
-
found 15 more mags as of July 3 2011. all out of wrapper. they are factory 5 rounders
-
looking for a factory bolt hold open and BHO spring for my saiga 12, put my away and cant find it to install it into the gun.
thanks
-
-
-
selling a Busse / Scrapyard DMDC knife, if your reading this then you probably know about their nice knifes. i got this in a watch trade and have not used it, it has sat on my shelf since i cant bring myself to use such a nice knife. it has not been sharpened/reground since left the factory so you can have it sharpened as you wish(IE no one has bubba'd the edge profile).the tip some have called a penetrator tip since it comes down at a slight angle at the end. for the price i am asking it comes as a package with the molded kydex sheath and as you can see by the paracord it has not had any use. $150 FIRM takes it home, and yes i can ship for the price of USPS shipping.
-
bueller , offers ?
-
bought a glock 19 4th gen and now im selling off my G34 gun but since the slide and barrel dont match the lower as i had to buy the lower seperately i am selling it off seperately.
it is a G17 third gen, wolf 3 or 3.5 # connector, heavier spring for lighter trigger pull, trigger bar and internals have been polished for smoother action. also has the cutout grip tape treatment (the one you buy thats already die cut) . i am wanting $300 for it, cash and carry with CWP . or for out of state guys your FFL must accept private transfers in bound
-
hey guys, caught a used tromix brake at the local gunshow and now im selling the mississippi auto arms muzzle attachement that i had on my gun , this is the one i have but this picture is from their website, http://www.mississippiautoarms.com/images/MAATP1.JPG , the exact points arent as seen as they seemed to be flater by like a half milimeter but its still i meatgrinder of a muzzle attachment, im wanting $30 shipped.
thanks
-
rest of mags SPF to member on here, will let you know if anything changes
-
well guys, im going to sell off my collection of mags so that i can fund a seiko watch project ( a 6105 if any of you seiko watch guys must wonder) . this is a private mag sale and is not a business. the only trade i would consider is a working 6105 in pretty decent condition.
these are the factory 5 rounders
18 mags of 22 left(2 SPF)
as for pricing, i can do this:
1 mag for $30, plus shipping
2+ @$25 per mag plus shipping
there is about 5 mags still in the wax paper but the rest are still all unused, unfired, and never been test mounted in the gun.
i also have one Promag 10rd magazine, unused,unfired,unmounted still in package for $30
as for shipping i can do usps first class or i can do priority flat rate, so i would figure add $3 for first class or i can do a flate rate envelope for 2 mags for $5 , or once we get up into the high count of mags i can do a USPS medium box for $10 and i would figure depending on the box it would be 4-6 mags maybe more, so that old saying the more you buy the more you would save on shipping.
as for payment i can only accept USPS MO's till i get my paypal account resolved and when that goes thru it would have to be discrete and you would have to cover the 4% fees.
as for feedback, i have positive on here, on uzitalk under the same name, over 40 on ebay and almost 20 on gunbroker, and never a single negative report.
-
heres a dumb question i have, when first shooting it, do i start and 1 and work up from there till it cycles right or start at 4 and work way down till it stops working, i have the gunfixer plug and didnt get any instructions with it. i would be using the cheap walmart stuff for it.
thanks
-
just selling this stuff to clear out some space.
the mosin nagant is a 91/30 that i would consider a shooter grade/ everyday grade. its not a pristine one but its not a total crap of a gun. it looks to maybe be a rearsenal since the bolt and body and trigger guard are all electropencil serial engraved to the reciever serial. i have encluded a picture of the top of the reciever to show the date and the location stamp (triangle with forward arrow). the bolt has also been gone thru and tightened up so you dont have to do the handle slap to get it open. the price also includes roughly 150 rounds of surplus ammo(the brownish case color stuff). i am wanting $175 for the package. or i am willing to trade plus cash your end towards a bulk case of walmart 22LR (the 550pack 10pack case) or also towards a basic working luminox watch.
next on the list is body armor, i believe both are level 2 or 2a, i will have to check again. one is the one that the coast guard uses and normally only avail to mil/leo. the other one that looks like a shooting vest setup is a british vest that is not only bulletproof but also stab and needle proof, the MFG is unknown since the labels were cutout but apparently it was made in the USA by what the sticker shows. each vest is $250, no trades.
-the brand new never used elbow pads are $10 plus ship
-the digi ACU shoulder straps is from a large molle2 mountain ruck, i want $15 for them, plus ship
-the mags are unused promag magazines for the colt 9mm setup for the AR15, i want $15 per mag or make me a reasonable offer on all of them,
-magtech 9mm subsonic ammo - 30 rounds left , $10 , had the gun and sold it and found this and the mags at the back of the safe.
-AK47 magazine pouches, i got them when i bought my krink but i dont like them. $5 for each 2 mag pouch and $10 for the 4 mag pouch.
-mossberg 500 B-Square optics mount, clamps over reciever and replaces 2 screws on the gun, comes with proper screws to mount it, $20
i can take discreet paypal under the gift option.
-
well ive got the gun and ive got the parts, i just need to find someone with the expertise of these guns, since i dont have a proficent knowledge of what to open the gas ports to and all the other little details.
-
any other people or companies can detail pricing of cost to do ?
-
hey guys, i did some searching and couldnt really find a thread on the pricing associated with SBS'ing a Saiga 12. ive found all the different threads on barrel lengths and the such and i know its between the 8,10 and 12 barrel length, but i was wondering, going with ballpark figures, what it would take to convert it to that length, i know im going to have a $200 sbs stamp, but things such as Barrel cutting and threading, drilling and/or moving gas block, i already have a gunfixr gas plug and aftermarket puck so ive already paid for those(along with the rest of the conversion and compliance parts).
thanks for the info yall can give me
-
up for sale is a beretta 21a 22LR pistol with a threaded barrel. this gun comes with an italy beretta mag and an aftermarket mag, i believe both are either 7 or 8rd (whichever is factory count) . the barrel like i said is threaded, it looks to be a completely aftermarket barrel but i do not know the mfg (i cannot find a seam so i know its not threaded to a factory barrel) . the hinge pin area is not cracked nor does it show any microcracks(ive heard this is a common area when being a threaded barrel). there is some wear on the gun but thats from where the slide meets the underside of the barel and where the slide meets the frame, but it seems to be from a tight fit.
what i am valueing this package at is $400 and i am looking for either a professionally threaded ruger mk 1/2/3 setup or even a factory bull barrel ruger mk pistol plus cash. thats the only trades im really looking for as i own a sig mosquito already and dont want a buckmark or a neos. reason for selling is that this gun is too small for my large hands. im in orlando for any FL guys
-
bueller ? (or bob ash)
-
just to confirm ,the threaded bosses on the plate go on the inside so that its flush, and not on the outside protruding(thought possibly to lock on ACE folder mechanism from torsional twisting) ?
-
were pulling your mancard over at UT, tsk tsk , good luck on sale jake
-
best way to acieve the 1.5-3 degrees as far as precise measurement? and do you have any pictures bob, im a visual type learner. and thanks a bunch for the info
WTS: Romy G AK47 parts kit with factory barrel and matching #'s
in Unsorted Ads prior to November 2012 (WTS / WTT)
Posted · Edited by mob
numbers matching kit, and its one of the earlier ones before the barrel ban so still has the factory barrel. i have even demilled this kit further by taking off the old sheetmetal and rivets, so it is ready for a degrease, rivet and refinish. the front trunion has been pressed off. this one is nicer than the other kit i had for sale, i was going to build it but i bought an ipad at a killer price.
asking $325 plus ship or willing to meet in orlando, FL for cash and carry. SOLD SOLD SOLD