tmrami 1 Posted April 29, 2010 Report Share Posted April 29, 2010 I just got my flat bullet guide from Carolina shooters supply and it has a flat end as opposed to the sloped ramp i've seen in pics on other posts. Does this affect the performance at all or should I try and file that down myself? Quote Link to post Share on other sites
jimdigriz 580 Posted April 29, 2010 Report Share Posted April 29, 2010 I just got my flat bullet guide from Carolina shooters supply and it has a flat end as opposed to the sloped ramp i've seen in pics on other posts. Does this affect the performance at all or should I try and file that down myself? The bullet guides differ in appearance by caliber. What you're describing sounds right for the x39. I wouldn't mess with it. Quote Link to post Share on other sites
tmrami 1 Posted April 29, 2010 Author Report Share Posted April 29, 2010 OK. Thanks for the response! I just went to dinzagarms and saw that they are machined different for each caliber. Whoaaa, that would have been nasty! Quote Link to post Share on other sites
sailor 6 Posted April 30, 2010 Report Share Posted April 30, 2010 You might watch for soft nose or hollow points to hang up on the flat face of the bullet guide. Not saying they will, but some of us have had that happen. A bit of filing with a 1/2 round or rat tail file to get rid of the sharp corner will eliminate that problem. Not a big deal, but be prepared. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.