jim brannon 0 Posted January 19, 2011 Report Share Posted January 19, 2011 I'd like to put front and rear sights on my .223 my fsb is canted. Sounds like a good excuse right? Question is must they be tigged or can I just tack it down with my arc welder on low. Will the elevation from front to rear be ok (mounting the rear sight to the top of the rear cover and the front mounted to the gasblock) or are some spacers needed? Then I'd like to sleeve the barrel and thread on an a2 flash hider. I know I've seen this some where if someone has seen a pic of this I'd love to see it. Quote Link to post Share on other sites
michael_glenning 0 Posted January 22, 2011 Report Share Posted January 22, 2011 I am planning the exact same project. I believe that caralina shooters supply offers a kit of parts pre shimmed, and would most likely relay any install advice. If you don't need any advice and are willing to just do it, an HK part kit supplier like http://www.robertrtg.com/hk93.html might do. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.