TonyRumore 1,332 Posted August 2, 2005 Report Share Posted August 2, 2005 These are the flash hiders used on all the Tromix conversions. They can be bonded on using red loctite. Thorough testing has proven that they DO NOT come off, trust me. I can also thread them 7/8x28 if you really want to go that route. http://www.hunt101.com/showphoto.php?photo=310138 $39ea shipped. I have them in stock. Tony Rumore Tromix Corp Link to post Share on other sites
bobbysturbobug 0 Posted August 4, 2005 Report Share Posted August 4, 2005 These are the flash hiders used on all the Tromix conversions. They can be bonded on using red loctite. Thorough testing has proven that they DO NOT come off, trust me. I can also thread them 7/8x28 if you really want to go that route. http://www.hunt101.com/showphoto.php?photo=310138 $39ea shipped. I have them in stock. Tony Rumore Tromix Corp <{POST_SNAPBACK}> I'll take two. Please let me know the payment method you accept. Link to post Share on other sites
TonyRumore 1,332 Posted August 4, 2005 Author Report Share Posted August 4, 2005 You can call me at 918 251-5640 with a credit card, or send an MO to Tromix 405 N. Walnut Ave #8 Broken Arrow, OK 74012 Link to post Share on other sites
SAIGA12nut 0 Posted August 7, 2005 Report Share Posted August 7, 2005 Any idea where to get a flash hider for a 18.5" barrel WITHOUT threads? My gunsmith cut the barrel down for me (professionally), but im still wanting a MB or FH. Please let me know, ~Zach Link to post Share on other sites
HunterGren 0 Posted August 8, 2005 Report Share Posted August 8, 2005 These are the flash hiders used on all the Tromix conversions. They can be bonded on using red loctite. Thorough testing has proven that they DO NOT come off, trust me. I can also thread them 7/8x28 if you really want to go that route. http://www.hunt101.com/showphoto.php?photo=310138 $39ea shipped. I have them in stock. Tony Rumore Tromix Corp <{POST_SNAPBACK}> I was wondering if you have any already converted saiga 12's that still have a 19 inch barrel? All the ones on the tromix website look like there short barrel shotguns. Would it be possible to have a extra long flash hider made & permently welded on to make one a non sbr? Link to post Share on other sites
Cobra 76 two 2,677 Posted August 8, 2005 Report Share Posted August 8, 2005 Any idea where to get a flash hider for a 18.5" barrel WITHOUT threads?My gunsmith cut the barrel down for me (professionally), but im still wanting a MB or FH. Please let me know, ~Zach <{POST_SNAPBACK}> Read his post again. Those are for unthreaded bbls. He said he can also thread them if you want that. HAPPY BIRTHDAY TONY! Link to post Share on other sites
TonyRumore 1,332 Posted August 11, 2005 Author Report Share Posted August 11, 2005 I am currently building a couple of 15.5" guns with permanent 2.5" flash hiders, as well as a pair of 12.5" guns with 5.5" permanent flash hiders. Link to post Share on other sites
Jeff Taylor 0 Posted August 12, 2005 Report Share Posted August 12, 2005 I am currently building a couple of 15.5" guns with permanent 2.5" flash hiders, as well as a pair of 12.5" guns with 5.5" permanent flash hiders. <{POST_SNAPBACK}> I was considering doing the same thing...Is it legal? Jeff Link to post Share on other sites
BattleRifleG3 16 Posted August 12, 2005 Report Share Posted August 12, 2005 (edited) Note he said PERMANENT. That means they count towards barrel length. Barrel length must be 18" minimum. 15.5 + 2.5 = 18. 12.5 + 5.5 = 18. Yes that's legal. Or, in the words of Darth Siddeous - "I will make it legal." Edited August 12, 2005 by BattleRifleG3 Link to post Share on other sites
Recommended Posts