Bullet Guide Update?

[strider12 0]

Hey all!!

 

I searched but didn't find anything on this. I have watched a couple conversion videos that were done 6 months ago and when doing the BG they talk about making sure it is aligned to the left of the step (And none of those videos really go into depth on that) but Carolina Shooter's Supply video from a couple months ago says to just make sure it's centered. Was the design changed subsequent to those original videos?

 

Please help as I am starting this in the next few days!

 

Thanks for all your help.

 

And I'm probably in the wrong forum, apologies!!

Edited December 13, 2011 by strider12

[Sweetums 5]

Does your Saiga have a round or flat trunnion?

[strider12 0]

Does your Saiga have a round or flat trunnion?

 

Thanks for the reply. It is rounded.

[Sweetums 5]

On the 7.62x39 round trunnion rifles, the right hand edge of the relief area (the little cut-out notch at the front that slides under the barrel) should line up with the raised step in the chamber face at about a 4 o'clock position. Be careful that it doesn't go to the right of that boundary or the bolt may hang up on it.

 

Just from what I've read, and just installed one. Your mileage may vary.

[strider12 0]

On the 7.62x39 round trunnion rifles, the right hand edge of the relief area (the little cut-out notch at the front that slides under the barrel) should line up with the raised step in the chamber face at about a 4 o'clock position. Be careful that it doesn't go to the right of that boundary or the bolt may hang up on it.

 

Just from what I've read, and just installed one. Your mileage may vary.

 

Thank you, that is a big help!!