kalashnik 1 Posted April 4, 2012 Report Share Posted April 4, 2012 I was removing the muzzle brake off of my wasr 10 and the retaining pin got stuck. I cant pop it back out to secure the muzzle brake. Looks like a piece of metal shaving from the muzzle brake got stuck in there when twisting the brake off. Is there a fix or am i screwed? Is there a way to remove the pin/spring? thanks. Quote Link to post Share on other sites
Floyd9 30 Posted April 4, 2012 Report Share Posted April 4, 2012 Tap out the front pin holding your FSB on, it also retains the pin. There is a notch in the pin that allows it to only travel so far forward, so it doesn't get lost when you remove your muzzle device. Quote Link to post Share on other sites
kalashnik 1 Posted April 4, 2012 Author Report Share Posted April 4, 2012 After getting the pin out. Will the pin just come out? Will it come out from the front of the fsb or rear? Also since my wasr has canted sights, can I knock out the second pin and adjust the post? And do I just put yhe pins back? Quote Link to post Share on other sites
kalashnik 1 Posted April 6, 2012 Author Report Share Posted April 6, 2012 I was able to tap out the front fsb pin. I had to tap the retaining pin in then push it out using from the fsb hole. Worked out great thanks. 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.