BattleRifleG3 16 Posted July 18, 2004 Report Share Posted July 18, 2004 I was planning on offering a front site that mounted to the gas block and included a bayonet mount (since Saigas have no such thing and won't even after the ban dies). Anyone interested? I believe it would be a tight fit and secured by a screw behind the block. Anyone interested in a version with a Picatinny rail over the barrel for a flashlight or laser? Quote Link to post Share on other sites
PM2790 0 Posted July 19, 2004 Report Share Posted July 19, 2004 So, it would look like the one from ACE, only with bayonet lug? What bayonet would fit? Quote Link to post Share on other sites
BattleRifleG3 16 Posted July 19, 2004 Author Report Share Posted July 19, 2004 I'm not familiar with the one from ACE, so I'll have to check them out. I'm trying to figure out which bayonet would be best to make the lugs for, so input would be appreciated. Quote Link to post Share on other sites
bamaboy 0 Posted July 19, 2004 Report Share Posted July 19, 2004 I'd be interested in the rail over the barrel, also hows the 308 mag convertions coming? any thoughts on installing a muzzle device on a 308 ? Quote Link to post Share on other sites
BattleRifleG3 16 Posted July 20, 2004 Author Report Share Posted July 20, 2004 G3 mag conversion is moving more slowly than expected. I have thus far been using carbon steel, which has been hell to machine so far, due to the structural role of this adaptor due to the necessary removal of the cross post in order not to touch the trunion. I'm leaning towards using aluminum, and now have a system in mind to provide the same support through more efficient means (no brainer stuff really, just a matter of figuring out how to fit it in there.) If you guys don't mind the end result being 1.75" wide instead of 1.5", I think that's where I'll go with this. Costs will probably be the same, but quality would be better, ie smoother. Remember, this is grueling hard manual milling. Quote Link to post Share on other sites
BattleRifleG3 16 Posted July 20, 2004 Author Report Share Posted July 20, 2004 I looked at the ACE offering and my design is quite different. While ACE's front site attaches to the upper half of the gas block, my design fits around both. ACE's has a front site loop, while mine will have straight vertical ears around the front site post. It will be intended to match an AR-15 style rear site mounted on a receiver cover. Also, ACE's is designed and dimensioned for the AKM, while all my current accessory designs focus on the Saiga rifles. While there will be plenty of AKM pre-banifying parts when the ban dies, parts for the Saiga/AK-100 will be harder to find and that's what I'll aim to provide. Also, while many AKM type rifles are configured for authenticity, Saigas are more frequently used for creativity, which is my forte. Figure people will want their AKM parts to be exactly what was originally designed, while Saiga owners will take their already modified design and fly with it. Quote Link to post Share on other sites
PM2790 0 Posted July 22, 2004 Report Share Posted July 22, 2004 Aluminum will probably be OK as long as it is hard anodized for wear resistance. 1.75" wide? That will stick out about 1/4" each side of the receiver. Don't know. I guess I would have to see it first. Quote Link to post Share on other sites
BattleRifleG3 16 Posted July 22, 2004 Author Report Share Posted July 22, 2004 I think the outside of the Saiga receiver is something like 1.3" or 1.35". That would mean the structural ears of the adaptor would stick out 0.2" or so on each side. Remember, though, on the left is the scope rail and trunion bulge, and on the right is the selector. This wouldn't stick out much if at all among those components. Quote Link to post Share on other sites
RooK 0 Posted July 23, 2004 Report Share Posted July 23, 2004 I'd be interested in shelling out money for a front sight that mounts on the gas block if it's a sleek design. The one from Ace is somewhat bulky, and I hate the way the flat surfaces look on it. Quote Link to post Share on other sites
BattleRifleG3 16 Posted July 24, 2004 Author Report Share Posted July 24, 2004 I'll keep your thoughts in mind. Can't promise mine will be less bulky, but I could have it angle down to the barrel. And most importantly, it won't be above the gas block, it will attach to the front of the gas block. Quote Link to post Share on other sites
PM2790 0 Posted July 24, 2004 Report Share Posted July 24, 2004 Don't mess with a clamp on design then. Just cut a standard FS and weld it to the GB. Check out some of ORF's work for examples. Quote Link to post Share on other sites
BattleRifleG3 16 Posted July 24, 2004 Author Report Share Posted July 24, 2004 Welding isn't within my means, nor is working on other people's guns. I can do clamp on accessories for those who want them. I plan to offer a bayonet mount without the site for those wanting other site options. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.