czgunner 0 Posted March 2, 2007 Report Share Posted March 2, 2007 Somebody with a caliper please tell me the OD of an unmodified S308 muzzle, and the OD of the muzzle after cutting off the FSB sleeve. I am about to buy some thread cutting tools, but want to know this first. Thanks all! Quote Link to post Share on other sites
macbeau 902 Posted March 2, 2007 Report Share Posted March 2, 2007 PM Dinzag - he knows all the particulars of the S-308 muzzle & barrel. I will tell you that the muzzle has a SERIOUS taper from the muzzle to about 1/2" back. There is also a step about 1/4" in from the back of the FSB. Dinzag has a drawing of it... Also, you don't need to cut off the FSB. If you drive out the two retainer pins on the top (under the "A"), you can then drive it off with a mallet and block of wood. Somebody with a caliper please tell me the OD of an unmodified S308 muzzle, and the OD of the muzzle after cutting off the FSB sleeve.I am about to buy some thread cutting tools, but want to know this first. Thanks all! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.