FCG Removal ?

[Eugene Onegin 6]

OK how do I begin ? I went to FAQs thread but every time I click on to it I get signed off.

[Superhawk138 202]

OK how do I begin ? I went to FAQs thread but every time I click on to it I get signed off.

This link will show you how to remove the original FCG. http://www.cross-conn.com/Saiga_Conversion/Step_2.htm

[nalioth 405]

This post also has some relevant information

 

http://forum.saiga-12.com/index.php?showtopic=21565&hl=

 

You might want to delete your cookies for this site (or enable them) and see if you lose the "signs me off" problem.

[Eugene Onegin 6]

What I'm trying to do is remove the FCG from a SAIGA 308 ,from the looks of it if I can get the safty out the rest of the parts should come out fairly easily.

[Cobra 76 two 2,677]

The OP didn't specify but I believe he's talking about an already converted .308 so the crossconn site won't be any help.

Depending on exactly what kind of axis pin retainer you have, you should be able to remove it by either removing the safety selector, and then the curved plate that's against the left side of the receiver... or by removing the wire retainer. If Dave built it he more than likely used the cheapest available retainer.

Pics would help.

[Eugene Onegin 6]

OK got the safety and the trigger out of the receiver, now later today I will attempt to take the trigger and disconnector apart so I may perform the trigger slap fix .

[Eugene Onegin 6]

OK got the trigger slap mod done and managed to get everything back together as far as putting the hammer , trigger and BHO gizzmo back in the rifle that's another thing.

OK got the safety and the trigger out of the receiver, now later today I will attempt to take the trigger and disconnector apart so I may perform the trigger slap fix .