apriav 0 Posted December 28, 2009 Report Share Posted December 28, 2009 (edited) I installed a JP comp and my Saiga 12 will not eject fired shells. I enlarged the 3 gas ports from .070 to .090 and have the same problem. How big can I go? The JP comp reduces recoil by 50%, now I have to get it to run. Edited December 28, 2009 by apriav Quote Link to post Share on other sites
saigafreake 27 Posted December 28, 2009 Report Share Posted December 28, 2009 have u tried gunfixers plug and what loads are you shooting. Quote Link to post Share on other sites
apriav 0 Posted December 29, 2009 Author Report Share Posted December 29, 2009 I am using the same stuff that used to run just fine, 1 1/8th 3 dram loads. Quote Link to post Share on other sites
mscottrogers 56 Posted December 29, 2009 Report Share Posted December 29, 2009 you can drill a forth hole at .090. thats how mine are Quote Link to post Share on other sites
apriav 0 Posted January 2, 2010 Author Report Share Posted January 2, 2010 Just for the record....it took drilling out to .125 in all three holes, and it is not over gased. Shells are ejecting about 3 feet with 1 1/8 3 dram loads. Quote Link to post Share on other sites
saigafreake 27 Posted January 3, 2010 Report Share Posted January 3, 2010 cool glad you got it workin. is the recoil almost gone now? Quote Link to post Share on other sites
apriav 0 Posted January 5, 2010 Author Report Share Posted January 5, 2010 It is very soft shooting.....but the noise to the sides is loud, double plug your ears. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.