Stuart2 0 Posted April 30, 2005 Report Share Posted April 30, 2005 Hi A friend of mine at the range mentioned about a week ago, that you could try soldering the spring back together. To try & solve the cycle problem. I modified my mag to fit 6 rounds within the same mag but found that it would not cycle the first round on a closed bolt. I had to cut the spring to fit the 6 rounds. See photos for details. The first spring that I fixed was a little rough but worked. The main problem was the soldering rod was not heating up the spring enough. I wish I had an LPG burner. Conclusion I went to the range yesterday & the shotgun cycled without a problem. There two things that I done differently before I went to the range. 1 Fixed the spring. 2 Cleaned the throat of the shotgun with the brush & solvent. I was told to do this from the same guy. Cleaning the throat is the most important area for any shotgun. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.