rjwillow 5 Posted January 17, 2012 Report Share Posted January 17, 2012 Hey Folks... I wanted to make my selector lever a little more finger friendly and be able to keep some semblance of a firing grip while managing the safety. This is what a came up with: I used a leftover 10-32 screw from a screw-build kit. It was hex-pan head when it started. I chucked it into my drill press and brought down the head height and diameter to fit into the stamped channel on the back of the selector. I drilled and tapped 10-32 through the appropriate location on the lever. I installed the screw from the backwith locktite and put a knurled nut on from the front. The nut came from a sling swivel kit from my junk drawer. Some locktite on that and it's done. I have my selector tension dialed in so it's pretty smooth and positive. So this mod feels really good. I also like that I have a positive tactile indicator whre I can index my trigger finger. I'll add some pics below. Otherwise they are in my gallery... later rich 2 Quote Link to post Share on other sites
ChileRelleno 7,071 Posted January 17, 2012 Report Share Posted January 17, 2012 Looks good... Always fun to make your own little mods. Quote Link to post Share on other sites
tchick 52 Posted January 31, 2012 Report Share Posted January 31, 2012 Good mod. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.