Jump to content


Photo
- - - - -

Ok Cameron It works..With a Few Modifications to complete the mini dra

Mini Draco SBR Mini Draco SBR Chaos Ak Dust Cover Rail Chaos Midwest Industries Quad Rail

  • Please log in to reply
6 replies to this topic

#1 voonman

voonman

    Executive Member

  • Contributor
  • PipPipPip
  • 664 posts
  • Location:USA

Posted 07 August 2014 - 08:44 PM

I just recieved my Brand new Mini Draco from Buds Gunshop and bought about $500 in extra parts plus an ATF Tax stamp for the Form 1 Paper work to get this little guy a new limb..Here is the mini draco project in progress.As always Chaos always makes an Awesome product..I was one of the first guys to buy one of your Chaos rails when you made them for the Saiga 12 and i will continue to buy there products...for this little guy I had to do a little modifications to the Chaos AK Titan Rear Rail gas lever for it work on the Mini Draco Gas Tube..After everything was dremeled down to fit.. the little lever that is used to remove the pin for the gas tube broke off while i was installing back on..no worries  it still works but it will requre a bullet to turn the latch upwards..I wonder if cameron has this as a replacement part?Ill give him a call tomorrow and see if he does..below are the pics..

 

IMG_0235.JPG

 

IMG_0233.JPG

 

IMG_0251.JPG

 

IMG_0250.JPG


Edited by voonman, 07 August 2014 - 08:48 PM.

  • Cameron Hadley, GunFun, doodi1 and 1 other like this

#2 Bunker83

Bunker83

    Advanced Member

  • Member
  • PipPip
  • 130 posts

Posted 08 August 2014 - 09:51 AM

Damn that turned out pretty slick!!! When you get a new pin, it helps if you file a slight bevel around the edge, make sure you give it a good whack to flatten it back out after it's reinstalled

#3 voonman

voonman

    Executive Member

  • Contributor
  • PipPipPip
  • 664 posts
  • Location:USA

Posted 08 August 2014 - 03:36 PM

Damn that turned out pretty slick!!! When you get a new pin, it helps if you file a slight bevel around the edge, make sure you give it a good whack to flatten it back out after it's reinstalled

Thanx..i actually discovered that right after i re evaluated trimming it down.the beveled edge has to be filed down just a little bit..now i have to wait for the long part to make it a complete SBR



#4 poolingmyignorance

poolingmyignorance

    DEFINITELY NOT DIPLOMATIC

  • Contributor
  • PipPipPipPipPip
  • 3,148 posts
  • Gender:Male
  • Location:Texas

Posted 09 August 2014 - 09:13 AM

That looks great. Now you need a left side charging handle and a sweet ass trigger.


Our 2nd Amendment right is the most important of all, because it ensures us our ability to ultimately govern ourselves.
The ORGINAL Freedom of Religion is freedom FROM religion: My freedom from your religion and your freedom from mine.

**my post are meant to be general reference, and are not meant to be all inclusive. So if you say or atempt any of the actions that my postings reference ..your on your own*

#5 voonman

voonman

    Executive Member

  • Contributor
  • PipPipPip
  • 664 posts
  • Location:USA

Posted 09 August 2014 - 03:11 PM

thanx..the trigger isnt too bad..there is a tapco trigger inside..im looking at the lynch lef side charging handle..ill have to see if it will work with the chaos titan ak rail



#6 poolingmyignorance

poolingmyignorance

    DEFINITELY NOT DIPLOMATIC

  • Contributor
  • PipPipPipPipPip
  • 3,148 posts
  • Gender:Male
  • Location:Texas

Posted 09 August 2014 - 08:21 PM

Dude send it to tac47 and get the SRT trigger and left side charging handle..have them do a matt finish nickel plate on the bolt too. You'll have a wet dream of a Draco.
Our 2nd Amendment right is the most important of all, because it ensures us our ability to ultimately govern ourselves.
The ORGINAL Freedom of Religion is freedom FROM religion: My freedom from your religion and your freedom from mine.

**my post are meant to be general reference, and are not meant to be all inclusive. So if you say or atempt any of the actions that my postings reference ..your on your own*

#7 Cameron Hadley

Cameron Hadley

    Saiga + Chaos = 100% Badass!

  • Business Member
  • PipPipPipPipPip
  • 2,093 posts
  • Gender:Male
  • Location:Evansville, IN
  • FFL_Verified
  • 07FFL / 2SOT
  • Verified Business

  • Company Name:

    CHAOS INC.

  • Company Website:
    chaosus.com
  • Contact Phone:

    (812) 250-4919

Posted 11 August 2014 - 02:09 PM

Sweet!







Also tagged with one or more of these keywords: Mini Draco, SBR, Mini Draco SBR, Chaos Ak Dust Cover Rail, Chaos, Midwest Industries Quad Rail

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users