California Shooter
-
Content Count
4 -
Joined
-
Last visited
-
Just cut at the arrows progressively until you get it to fit in your gun. Cut here.jpg If you don�t want to mod your mag any you could just contact surefire and explain your problem and see what they can do for you. I tried this modification per this post, but still could not get a 10-round Surefire mag with ten rounds in it to lock into the receiver after I had removed three coils in succession. I had previously modified the follower stop by snipping a bit off the pointed bit because I thought that the follower was bottoming on this bit. Didn't help. What I found to work wa
-
I have additional information that may help further: I recently had a similar experience registering on another forum. I sent an email requesting help. This time, I received a response with several (generic) suggestions, one of which advised adding the forum's address to my contact list (which, in this case, is forum@saiga-12.com ). After doing so, I requested a resend of the confirmation email. I received it immediately. Again, this may help someone in the future having trouble receiving their confirmation email from this forum.
-
The purpose of my post was to help others having the same problem I had. At least now, if they do a search in regards to not receiving the confirmation email, my post may come up and give them an idea on what to try next. It's kind of difficult to ask the forum for help if you are unable to register on the forum. I'm glad that I finally made it, too.
-
If, like myself, you have a problem not receiving a confirmation email, try using another email provider (gmail, Yahoo!, etc.). My main account (sbcglobal.net) would never receive the confirmation email. I tried for over 9 months, several times. Three requests directly to forum monitors got no replies. Then, after reading a note from someone having similar problems registering for this forum on Calguns.net, I tried with a Yahoo! address that I seldom use. The first try was unsuccessful. But the second attempt worked. Hope this helps someone down the road.
