Nomad 0 Posted April 6, 2006 Report Share Posted April 6, 2006 I can't get the hammer pin out! What's the trick? I'm using a punch. Thanx for any replies. Quote Link to post Share on other sites
stokstad 4 Posted April 6, 2006 Report Share Posted April 6, 2006 I can't get the hammer pin out! What's the trick? I'm using a punch. Thanx for any replies. If you have removed the retaining spring it should just push out. I don't recommend beating it with a punch Quote Link to post Share on other sites
Nomad 0 Posted April 6, 2006 Author Report Share Posted April 6, 2006 I can't get the hammer pin out! What's the trick? I'm using a punch. Thanx for any replies. If you have removed the retaining spring it should just push out. I don't recommend beating it with a punch I don't know what the problem was--it was tuff. Yea, the retainer out - had to use the punch! It's out. Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted April 6, 2006 Report Share Posted April 6, 2006 It was prolly cought on the notch of the pin by the hammer spring pressure against the receiver hole. Quote Link to post Share on other sites
dinzag 31 Posted April 6, 2006 Report Share Posted April 6, 2006 When removing & installing the pins, it helps to wiggle the hammer/trigger while you push/pull. Don't use a punch as you can damage the receiver hole or the pin. The hammer was under spring tension and loading the pin in one direction in the hole. I needs to be centered to come out. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.