RDSWriter 5 Posted July 24, 2007 Report Share Posted July 24, 2007 (edited) After a buying spree over the past couple years, I'm now getting back to all my basic conversions for upgrades. I have an old Saiga 12 I picked up in '97 that I want to replace the magazine release lever. I've got the newer release and was needing to know how to remove the pin. I have tried to simply knock it out with a punch... BUT IT IS IN THERE. I kept hitting it harder until my gut told me to post an inquiry before hitting it any harder. My guess is that it is either (1) a very tight fit, or (2) has a spring that locks it in. FYI - my release lever is about 1/2 the length of the newer ones. Thanks for any help. Edited July 24, 2007 by RDSWriter Quote Link to post Share on other sites
kresk 10,063 Posted July 24, 2007 Report Share Posted July 24, 2007 After a buying spree over the past couple years, I'm now getting back to all my basic conversions for upgrades. I have an old Saiga 12 I picked up in '97 that I want to replace the magazine release lever. I've got the newer release and was needing to know how to remove the pin. I have tried to simply knock it out with a punch... BUT IT IS IN THERE. I kept hitting it harder until my gut told me to post an inquiry before hitting it any harder. My guess is that it is either (1) a very tight fit, or (2) has a spring that locks it in. FYI - my release lever is about 1/2 the length of the newer ones. Thanks for any help. I believe that pin is peened in, so you might want to take a punch either much smaller than the pin or the exact size of the hole and pound it through. Yes, the tension of the spring is probably contributing to the tightness of it. Quote Link to post Share on other sites
nalioth 405 Posted July 25, 2007 Report Share Posted July 25, 2007 Yep, it's just peened in. Be careful of the flying spring, when you drive out the pin (you'll have more fun putting it back together). Quote Link to post Share on other sites
RDSWriter 5 Posted July 28, 2007 Author Report Share Posted July 28, 2007 (edited) Anyone here removed one? I bought a complete parts kit that was taken from an existing S12. The pin didn't looked peened... but to be honest, it's been a while since I looked at it. Any advice on not losing the spring, et cetera is appreciated. FYI - If you're wondering why anyone would part out an S12....... apparently there was a OMFG moment in the SBS conversion which pretty much ruined the gun (from what I understand). They guy really didn't talk about - or want to talk about - why he was parting it out. Edited July 28, 2007 by RDSWriter Quote Link to post Share on other sites
TonyRumore 1,332 Posted July 28, 2007 Report Share Posted July 28, 2007 I have taken a few out. It is a SERIOUS pain in the ass to reinstall the lever. You'll need to make a slave pin to hold it together while you reinstall the pin. There are two styles of springs. One is a standard coil spring like you would find in a ball point pen, with a base plate on the other end. The other style is just like a standard AK-47 mag release spring. Both suck to reinstall. You will be seriously pissed off by the time you get that thing back together. Tony Quote Link to post Share on other sites
RDSWriter 5 Posted July 28, 2007 Author Report Share Posted July 28, 2007 (edited) I have taken a few out. It is a SERIOUS pain in the ass to reinstall the lever. You'll need to make a slave pin to hold it together while you reinstall the pin. There are two styles of springs. One is a standard coil spring like you would find in a ball point pen, with a base plate on the other end. The other style is just like a standard AK-47 mag release spring. Both suck to reinstall. You will be seriously pissed off by the time you get that thing back together. Tony .. Oh Joy! Thanks for the heads up Tony. Edited July 28, 2007 by RDSWriter Quote Link to post Share on other sites
nalioth 405 Posted July 31, 2007 Report Share Posted July 31, 2007 I have taken a few out. It is a SERIOUS pain in the ass to reinstall the lever. You'll need to make a slave pin to hold it together while you reinstall the pin. There are two styles of springs. One is a standard coil spring like you would find in a ball point pen, with a base plate on the other end. The other style is just like a standard AK-47 mag release spring. Both suck to reinstall. You will be seriously pissed off by the time you get that thing back together. Tony I've replaced a couple, and like he says, it aint real fun (unless you've got 3 hands). Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.